Is the Lance for high-pressure washer, inlet GZ M22x1.5, stainless steel, type MT1 rated for continuous use at 150Â°C and 280 bar?

Yes. The Lance for high-pressure washer, inlet GZ M22x1.5, stainless steel, type MT1 is rated for continuous use at up to +150Â°C and a working pressure of up to 280 bar. It has no thermal insulation, so ensure appropriate handling and safety measures when operating continuously at these limits.

Can the Lance for high-pressure washer, inlet GZ M22x1.5, stainless steel, type MT1 be used safely at 150Â°C and 280 bar for short-duty cycles?

Yes. Lance for high-pressure washer, inlet GZ M22x1.5, stainless steel, type MT1 is specified for working pressure up to 280 bar and operating temperature up to +150Â°C. Provided your use is within those stated limits, and the application truly is short-duty cycles, the lance can be used safely. Ensure all connections (inlet GZ M22x1.5 and outlet GW 1/4" NPT), seals, and the rest of the system are rated for 280 bar and 150Â°C, monitor for leaks, and follow manufacturer installation and safety guidelines. If thermal insulation or prolonged exposure above specified limits is expected, consult the manufacturer before use.

Can Lance for high-pressure washer, inlet GZ M22x1.5, stainless steel, type MT1 be used with fluids at 150Â°C and 280 bar?

Yes. Lance for high-pressure washer, inlet GZ M22x1.5, stainless steel, type MT1 can be used with fluids at 150Â°C and 280 bar, provided the following conditions are met: - Maximum working pressure is 280 bar. the lance is rated for this pressure. - Maximum operating temperature is +150Â°C. the lance is rated for this temperature. - The lance is stainless steel and the connections match your system: inlet GZ M22x1.5 and outlet GW 1/4" NPT. - The product description states it is without thermal insulation (type MT1), so avoid direct prolonged contact with the hot surface; use proper personal protective equipment and handling procedures. - Ensure the fluid is compatible with stainless steel at high temperature and pressure (corrosive or abrasive media may shorten service life). - Verify downstream/upstream components (hoses, seals, fittings) are also rated for 150Â°C and 280 bar. - Confirm installation and operation comply with applicable safety standards and manufacturerâs instructions. If all system components and safety measures meet these ratings and compatibility checks, the lance may be used at 150Â°C and 280 bar.

Lance for a high-pressure washer, inlet M22x1.5 male, steel stainless, type MT1

All products, Guns for high-pressure washers/

Additional information

Lance without insulation thermal type MT1 intended for a high-pressure washer. Connections: (inlet) M22x1.5 male / (outlet) 1/4″ NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MH-140010	Lance 250 mm, stainless steel, inlet M22x1.5 male	-	280	In stock	Enquiry
MH-140012	Lance 500 mm, stainless steel, inlet M22x1.5 male	-	280	In stock	Enquiry
MH-140014	Lance 700 mm, stainless steel, inlet M22x1.5 male	-	280	In stock	Enquiry
MH-140016	Lance 900 mm, stainless steel, inlet M22x1.5 male	-	280	In stock	Enquiry
MH-140018	Lance 1200 mm, stainless steel, inlet M22x1.5 male	-	280	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lance without insulation thermal type MT1 intended for a high-pressure washer. Connections: (inlet) M22x1.5 male / (outlet) 1/4″ NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.