Can DKOL hydraulic end, type ZMW121, light series, carbon steel, be crimped with a standard industrial hose sleeve and keep the 24Â° Oâring cone seal?

Yes. DKOL hydraulic end, type ZMW121, light series, carbon steel can be crimped with a standard industrial hose sleeve and retain the 24Â° Oâring cone seal, provided the sleeve and crimping process match the hose type and manufacturer specifications. The fitting is designed for crimping in hydraulic and industrial hoses using a suitable crimping sleeve; correct sleeve dimensions, crimping pressure/profile, and assembly procedure must be followed to avoid deformation that could compromise the Oâring seal. Use recommended hose/fitting combinations and qualified crimping equipment to ensure reliable sealing.

Is DKOL hydraulic end, type ZMW121, light series, carbon steel compatible with crimp sleeves for hydraulic hoses?

Yes. DKOL hydraulic end, type ZMW121, light series, carbon steel is compatible with crimp sleeves for hydraulic hoses. The product description explicitly states it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. It has the standard Z-type hose tail, internal metric thread with nut, Oâring sealing on a 24Â° cone, and is made of carbon steel (galvanized), all consistent with crimpable fittings. Ensure you use the correct crimp sleeve and crimping specifications recommended for the hose construction and size.

DKOL hydraulic end, type ZMW121, light series, carbon steel

Q: Can DKOL hydraulic end, type ZMW121 light series (carbon steel) be crimped using a standard sleeve for industrial hoses and retain O-ring 24Â° cone sealing?

Yes. The DKOL hydraulic end, type ZMW121, light series, carbon steel can be crimped using a standard crimping sleeve designed for the specific industrial hose type and size. It is a standard hydraulic end fitting (type Z) with an internal metric thread and nut and uses Oâring sealing on a 24Â° cone (DKOL). The product description explicitly states it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type, and construction in carbon steel (galvanized) is compatible with conventional crimping processes. Ensure you use the correct sleeve profile and dimensions recommended for the hose and follow the hose manufacturerâs crimping specifications and tooling to maintain the Oâring 24Â° cone sealing integrity and achieve guaranteed assembly performance.

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	60

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMW121-12-03	End. GW M12x1.5, hose 3/16", 24°, o-ring, light	5	-	In stock	Enquiry
TI-ZMW121-12-04	End. GW M12x1.5, hose 1/4", 24°, o-ring, light	6	-	In stock	Enquiry
TI-ZMW121-14-03	End. GW M14x1.5, hose 3/16", 24°, o-ring, light	5	-	In stock	Enquiry
TI-ZMW121-14-04	End. GW M14x1.5, hose 1/4", 24°, o-ring, lightweight	6	-	In stock	Enquiry
TI-ZMW121-14-05	End. GW M14x1.5, hose 5/16", 24°, o-ring, light	8	-	In stock	Enquiry
TI-ZMW121-14-06	End. GW M14x1.5, hose 3/8", 24°, o-ring, light	10	-	In stock	Enquiry
TI-ZMW121-16-04	End. GW M16x1.5, hose 1/4", 24°, o-ring, light	6	-	In stock	Enquiry
TI-ZMW121-16-05	End. GW M16x1.5, hose 5/16", 24°, o-ring, light	8	-	In stock	Enquiry
TI-ZMW121-16-06	End. GW M16x1.5, hose 3/8", 24°, o-ring, light	10	-	In stock	Enquiry
TI-ZMW121-18-04	End. GW M18x1.5, hose 1/4", 24°, o-ring, lightweight	6	-	In stock	Enquiry
TI-ZMW121-18-05	End. GW M18x1.5, hose 5/16", 24°, o-ring, light	8	-	In stock	Enquiry
TI-ZMW121-18-06	End. GW M18x1.5, hose 3/8", 24°, o-ring, light	10	-	In stock	Enquiry
TI-ZMW121-18-08	End. GW M18x1.5, hose 1/2", 24°, o-ring, lightweight	12	-	In stock	Enquiry
TI-ZMW121-22-06	End. GW M22x1.5, hose 3/8", 24°, o-ring, light	10	-	In stock	Enquiry
TI-ZMW121-22-08	End. GW M22x1.5, hose 1/2", 24°, o-ring, light	12	-	In stock	Enquiry
TI-ZMW121-22-10	End. GW M22x1.5, hose 5/8", 24°, o-ring, light	16	-	In stock	Enquiry
TI-ZMW121-26-08	End. GW M26x1.5, hose 1/2", 24°, o-ring, lightweight	12	-	In stock	Enquiry
TI-ZMW121-26-10	End. GW M26x1.5, hose 5/8", 24°, o-ring, lightweight	16	-	In stock	Enquiry
TI-ZMW121-26-12	End. GW M26x1.5, hose 3/4", 24°, o-ring, light	20	-	In stock	Enquiry
TI-ZMW121-27-10	End. GW M27x2, hose 5/8", 24°, o-ring, lightweight	16	-	In stock	Enquiry
TI-ZMW121-30-10	End. GW M30x2, hose 5/8", 24°, o-ring, lightweight	16	-	In stock	Enquiry
TI-ZMW121-30-12	End. GW M30x2, hose 3/4", 24°, o-ring, lightweight	20	-	In stock	Enquiry
TI-ZMW121-36-12	End. GW M36x2, hose 3/4", 24°, o-ring, lightweight	20	-	In stock	Enquiry
TI-ZMW121-36-16	End. GW M36x2, hose 1", 24°, o-ring, lightweight	25	-	In stock	Enquiry
TI-ZMW121-45-20	End. GW M45x2, hose 1.1/4", 24°, o-ring, lightweight	32	-	In stock	Enquiry
TI-ZMW121-45-24	End. GW M45x2, hose 1.1/2", 24°, o-ring, light	38	-	In stock	Enquiry
TI-ZMW121-52-24	End. GW M52x2, hose 1.1/2", 24°, o-ring, light	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.