DKR 90° hydraulic end, type ZBW210, carbon steel, zinc-nickel
Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 90°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
List of product variants
| Article number | Product variant name | Nominal inner diameter | Working pressure [bar] | Enquiry |
|---|---|---|---|---|
| TI-ZBW210-02-03-CN | End. 90° G 1/8" BSP hose 3/16", cone 60°, Zn-Ni | 5 | - | |
| TI-ZBW210-02-04-CN | End fitting 90° GW 1/8" BSP, hose 1/4", cone 60°, Zn-Ni | 6 | - | |
| TI-ZBW210-04-04-CN | End fitting 90° GW 1/4" BSP, hose 1/4", cone 60°, Zn-Ni | 6 | - | |
| TI-ZBW210-06-04-CN | End. 90° G 3/8" BSP, hose 1/4", cone 60°, Zn-Ni | 6 | - | |
| TI-ZBW210-06-05-CN | End. 90° G 3/8" BSP, hose 5/16", cone 60°, Zn-Ni | 8 | - | |
| TI-ZBW210-06-06-CN | End fitting 90° G 3/8" BSP, hose 3/8", cone 60°, Zn-Ni | 10 | - | |
| TI-ZBW210-08-06-CN | End. 90° G 1/2" BSP, hose 3/8", cone 60°, Zn-Ni | 10 | - | |
| TI-ZBW210-08-08-CN | End fitting 90° G 1/2" BSP, hose 1/2", cone 60°, Zn-Ni | 12 | - | |
| TI-ZBW210-10-08-CN | End. 90° G 5/8" BSP, hose 1/2", cone 60°, Zn-Ni | 12 | - | |
| TI-ZBW210-10-10-CN | End fitting 90° G 5/8" BSP, hose 5/8", cone 60°, Zn-Ni | 16 | - | |
| TI-ZBW210-12-08-CN | End. 90° G 3/4" BSP, hose 1/2", cone 60°, Zn-Ni | 12 | - | |
| TI-ZBW210-12-10-CN | End. 90° G 3/4" BSP, hose 5/8", cone 60°, Zn-Ni | 16 | - | |
| TI-ZBW210-12-12-CN | End fitting 90° GW 3/4" BSP, hose 3/4", cone 60°, Zn-Ni | 20 | - | |
| TI-ZBW210-16-12-CN | End. 90° G 1" BSP, hose 3/4", cone 60°, Zn-Ni | 20 | - | |
| TI-ZBW210-16-16-CN | End fitting 90° GW 1" BSP, hose 1", cone 60°, Zn-Ni | 25 | - |
Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 90°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
Additional information
| Material | CS – steel (cast iron) |
|---|---|
| Standard length [m] | 6 |
Additional information
| Material | CS – steel (cast iron) |
|---|---|
| Standard length [m] | 6 |
