Is BANJO inch hydraulic end RNR, type ZBB600, carbon steel compatible with crimping sleeves for standard hydraulic and industrial hoses?

Yes. The BANJO inch hydraulic end RNR, type ZBB600, carbon steel is designed for crimping into standard hydraulic and industrial hoses. It features a regular hydraulic âtailâ (type Z) and a BSP screw connection (RNR), and the product description explicitly states it is designed for crimping using a crimping sleeve appropriate for the hose type. Made of carbon steel and galvanized, it is compatible with typical crimping sleeves used for the specified hoses.provided you select a sleeve matched to the hose construction and follow the hose manufacturerâs crimping specifications and tooling requirements.

Can BANJO inch hydraulic end RNR, type ZBB600, carbon steel be safely crimped using sleeves for BSP-threaded hydraulic hoses?

Yes. The BANJO inch hydraulic end RNR, type ZBB600, carbon steel can be safely crimped using sleeves for BSPâthreaded hydraulic hoses, provided the sleeve and crimping machine are matched to the hose type and size and the crimp profile meets the hose manufacturerâs specifications. The part is designed for crimping in hydraulic and industrial hoses (type Z standard hydraulic tail, BANJO for screw with BSP thread, RNR), and its carbon steel, galvanized construction is suitable for conventional crimping. Ensure correct sleeve dimensions, crimp force, and inspection for leaks/deformation after assembly, and follow hose and fitting manufacturer guidelines and relevant hydraulic standards.

Does BANJO inch hydraulic end RNR, type ZBB600, carbon steel require specific crimping sleeve dimensions?

Yes. The BANJO inch hydraulic end RNR, type ZBB600, carbon steel requires a crimping sleeve sized to match the specific hose type and dimensions. The product is designed for crimping into hydraulic and industrial hoses using a sleeve appropriate for the hose construction (inner diameter, reinforcement layers, and overall profile). Because the fitting is a standard hydraulic end (type Z) with a BANJO screw and BSP thread, proper sleeve selection is essential to ensure a secure crimp, seal integrity, and pressure rating. Key points: - Use a crimping sleeve compatible with the hose make/model and nominal bore that the ZBB600 fitting is intended for. - Sleeve inner diameter and length must match the hose outer diameter and recommended crimp length for that hose. - Material and hardness of the sleeve should be suitable for hydraulic service and the crimping method (mechanical or hydraulic crimper). - Follow hose manufacturer and crimper manufacturer specifications to achieve correct crimp dimensions and inspection criteria. If you need exact sleeve dimensions (inner diameter, length, and recommended crimp diameter) provide the hose type and nominal size; otherwise consult the hose manufacturerâs crimping table or the crimping sleeve supplier for the precise sleeve matched to BANJO inch hydraulic end RNR, type ZBB600, carbon steel.

BANJO inch hydraulic end RNR, type ZBB600, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), BANJO for screw with BSP thread (RNR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBB600-02-03	BANJO fitting 1/8" BSP, hose 3/16"	5	-	In stock	Enquiry
TI-ZBB600-02-04	BANJO fitting 1/8" BSP, hose 1/4"	6	-	In stock	Enquiry
TI-ZBB600-04-03	BANJO fitting 1/4" BSP, hose 3/16"	5	-	In stock	Enquiry
TI-ZBB600-04-04	BANJO fitting 1/4" BSP, hose 1/4"	6	-	In stock	Enquiry
TI-ZBB600-04-05	BANJO 1/4" BSP fitting, 5/16" hose	8	-	In stock	Enquiry
TI-ZBB600-04-06	BANJO fitting 1/4" BSP, hose 3/8"	10	-	In stock	Enquiry
TI-ZBB600-06-04	BANJO fitting 3/8" BSP, hose 1/4"	6	-	In stock	Enquiry
TI-ZBB600-06-05	BANJO fitting 3/8" BSP, hose 5/16"	8	-	In stock	Enquiry
TI-ZBB600-06-06	BANJO fitting 3/8" BSP, hose 3/8"	10	-	In stock	Enquiry
TI-ZBB600-06-08	BANJO fitting 3/8" BSP, hose 1/2"	12	-	In stock	Enquiry
TI-ZBB600-08-06	BANJO 1/2" BSP fitting, 3/8" hose	10	-	In stock	Enquiry
TI-ZBB600-08-08	BANJO fitting 1/2" BSP, hose 1/2"	12	-	In stock	Enquiry
TI-ZBB600-10-08	BANJO fitting 5/8" BSP, hose 1/2"	12	-	In stock	Enquiry
TI-ZBB600-10-10	BANJO fitting 5/8" BSP, hose 5/8"	16	-	In stock	Enquiry
TI-ZBB600-12-08	BANJO fitting 3/4" BSP, hose 1/2"	12	-	In stock	Enquiry
TI-ZBB600-12-10	BANJO fitting 3/4" BSP, hose 5/8"	16	-	In stock	Enquiry
TI-ZBB600-12-12	BANJO fitting 3/4" BSP, hose 3/4"	20	-	In stock	Enquiry
TI-ZBB600-16-12	BANJO 1" BSP fitting, 3/4" hose	20	-	In stock	Enquiry
TI-ZBB600-16-16	BANJO fitting 1" BSP, hose 1"	25	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), BANJO for screw with BSP thread (RNR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.