Is the ORFS hydraulic end, type ZOZ110, carbon steel, zinc-nickel compatible with standard crimping sleeves for industrial hydraulic hoses?

Yes. The ORFS hydraulic end, type ZOZ110, carbon steel, zinc-nickel is designed for crimping in hydraulic and industrial hoses.its type Z âregular hydraulic tailâ and external UNF thread with ORFS face seal are intended to be used with a matching crimping sleeve sized to the hose type. The material and zincânickel coating do not affect crimp compatibility; they provide corrosion resistance while the hose tail geometry determines sleeve fit. Ensure you select a crimping sleeve rated for the hose inner diameter, reinforcement type, and required crimp dimensions per the hose manufacturer and the ZOZ110âs specified hose I.D./crimp profile to achieve a proper, leakâfree crimp.

Can ORFS hydraulic end, type ZOZ110, carbon steel, zinc-nickel be used in high-pressure hydraulic systems up to X bar?

Short answer: Possibly - but not enough information. Explanation: The description indicates ORFS hydraulic end, type ZOZ110, carbon steel, zinc-nickel, with external UNF thread, face seal with Oâring, crimp design and highly corrosionâresistant ZnâNi coating. These features are compatible with many highâpressure systems, but safe working pressure depends on specific factors not provided: hose type and rated maximum working pressure, correct crimp sleeve geometry and crimping parameters, Oâring material and temperature/chemical compatibility, assembly quality, and system proof/test pressure. Carbon steel body and ORFS face seals are commonly used at high pressures, but you must verify the componentâs rated working pressure (or manufacturer datasheet), match it to the hose and crimp spec, and perform required pressure testing before service.

What sealing O-ring material is recommended for ORFS hydraulic end, type ZOZ110, carbon steel, zinc-nickel for chemical compatibility?

For ORFS hydraulic end, type ZOZ110, carbon steel, zinc-nickel, the recommended O-ring material for general chemical compatibility is FKM (Viton). Rationale: - Excellent resistance to hydraulic fluids (mineral oils, many synthetic oils), fuels, and most lubricants used in hydraulic systems. - Good high-temperature performance (typically â20 Â°C to +200 Â°C continuous, higher short-term). - Compatible with the zinc-nickel coating (no known adverse chemical interaction). If the system may be exposed to aggressive chemicals outside FKMâs compatibility (e.g., strong acids/alkalis, ketones like acetone, or steam) consider alternative elastomers: - EPDM. good for hot water/steam, glycol-based brake fluids, and some dilute acids/alkalis, but NOT compatible with mineral oils and many hydraulic fluids. - HNBR. better mechanical wear and tear resistance and good compatibility with many petroleum-based hydraulic fluids; better low-temperature performance than FKM in some grades. - PTFE (encapsulated or PTFElined O-rings). for extreme chemical resistance, but requires suitable gland design and may have lower elastomeric sealing force. Recommendation: Use FKM (Viton) O-rings as the standard sealing material for ORFS hydraulic end, type ZOZ110, carbon steel, zinc-nickel. Verify specific fluid and temperature conditions; if unusual chemicals or temperatures are present, perform compatibility check with supplier or select EPDM, HNBR, or PTFE-based seals accordingly.

Fitting hydraulic ORFS, type ZOZ110, carbon steel, zinc-nickel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic fitting (type Z – with an ordinary hydraulic “tail” for the hose), with UNF male thread, sealing face with an O-ring (ORFS). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZOZ110-09-04-CN	Fitting ORFS 9/16" male, hose 1/4", Zn-Ni	6	-	In stock	Enquiry
TI-ZOZ110-11-05-CN	Fitting ORFS 11/16" male, hose 5/16", Zn-Ni	8	-	In stock	Enquiry
TI-ZOZ110-11-06-CN	Fitting ORFS 11/16" male, hose 3/8", Zn-Ni	10	-	In stock	Enquiry
TI-ZOZ110-13-08-CN	Fitting ORFS 13/16" male, hose 1/2", Zn-Ni	12	-	In stock	Enquiry
TI-ZOZ110-16-10-CN	Fitting ORFS 1" male, hose 5/8", Zn-Ni	16	-	In stock	Enquiry
TI-ZOZ110-19-12-CN	Fitting ORFS 1.3/16" male, hose 3/4", Zn-Ni	20	-	In stock	Enquiry
TI-ZOZ110-23-16-CN	Fitting ORFS 1.7/16" male, hose 1", Zn-Ni	25	-	In stock	Enquiry
TI-ZOZ110-27-20-CN	Fitting ORFS 1.11/16" male, hose 1.1/4", Zn-Ni	32	-	In stock	Enquiry
TI-ZOZ110-32-24-CN	Fitting ORFS 2" male, hose 1.1/2", Zn-Ni	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic fitting (type Z – with an ordinary hydraulic “tail” for the hose), with UNF male thread, sealing face with an O-ring (ORFS). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.