Can the IN-LINE quick-connection set with hose end, without valve, polypropylene, SMC series DN 1,2 withstand continuous use at 6.9 bar and temperatures up to +82Â°C without EPDM seal degradation?

Yes. The IN-LINE quick-connection set with hose end, without valve, polypropylene, SMC series DN 1,2 is rated for working pressure up to 6.9 bar and an operating temperature range of 0Â°C to +82Â°C. Its seal is an EPDM o-ring, and EPDM is generally resistant to temperatures up to about +100Â°C and well suited for water-based inks, cooling fluids and many aqueous media. Therefore, when used within the specified limits (continuous pressure â¤6.9 bar and temperature â¤+82Â°C), the EPDM seal should not suffer degradation from temperature alone. Caveats: chemical compatibility with specific fluids (e.g., certain solvents, aggressive inks or gases) and mechanical factors (pressure spikes, abrasive particulates, installation stresses) can shorten seal life. For continuous operation in your exact fluid and duty cycle, validate with manufacturer data or perform application-specific testing.

Is the IN-LINE quick-connection set with hose end, without valve, polypropylene, SMC series DN 1,2 suitable for inkjet and medical fluids?

Yes. The IN-LINE quick-connection set with hose end, without valve, polypropylene, SMC series DN 1,2 is suitable for inkjet fluids and many medical fluids (e.g., blood, cooling liquids) as indicated in the product description. Its polypropylene construction, EPDM Oâring sealing, DN 1.2 mm size, working pressure up to 6.9 bar and operating temperature range 0Â°C to +82Â°C match common requirements for inkjet and some medical applications. Verify compatibility for specific fluids (sterility, chemical resistance, regulatory requirements) and any application-specific validation before use in critical medical or biohazard contexts.

Does the IN-LINE quick-connection set with hose end, without valve, polypropylene, SMC series DN 1,2 allow slight hose rotation to prevent twisting?

Yes. The IN-LINE quick-connection set with hose end, without valve, polypropylene, SMC series DN 1,2 allows slight rotation of the connected hose to prevent twisting and accidental disconnection. This coupling is designed so the two parts twist relative to each other while permitting limited hose rotation, improving hose longevity and system reliability within its specified operating conditions (DN 1.2 mm, polypropylene body, EPDM Oâring, up to 6.9 bar, 0â82Â°C).

A set quick coupling IN-LINE with fitting for hose, without valve, polypropylene, series SMC DN 1.2

All products, Industrial plastic quick couplings/

Additional information

Material	P – material (plastic)

A set quick coupling without valve – socket and plug with fitting for hose intended for printing installations inkjet, blood, fluids cooling, chromatography gas, itp. The connection consists in turning the two parts of the coupling relative to each other. coupling to also allows na light rotation connected hose, co prevents its twisting and accidental disconnection. Nominal quick coupling size: DN 1.2 mm. Length L – total length. Material: polypropylene. Sealing: O-ring EPDM. Working pressure: for 6.9 bar. Operating temperature: from 0°C to +82°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
CC-SMX-10-PP	Set IN-LINE SMC DN1.2 1/16", without valve, polypropylene	-	6.9	In stock	0 zł		Enquiry
CC-SMX-11-PP	Set IN-LINE SMC DN1.2 1/8", without valve, polypropylene	-	6.9	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A set quick coupling without valve – socket and plug with fitting for hose intended for printing installations inkjet, blood, fluids cooling, chromatography gas, itp. The connection consists in turning the two parts of the coupling relative to each other. coupling to also allows na light rotation connected hose, co prevents its twisting and accidental disconnection. Nominal quick coupling size: DN 1.2 mm. Length L – total length. Material: polypropylene. Sealing: O-ring EPDM. Working pressure: for 6.9 bar. Operating temperature: from 0°C to +82°C.