Does the T plug tee through, type R5 support repeated disconnections without loss of sealing on both mechanical and pneumatic sides?

Yes. The "T" plug tee through, type R5 is expressly designed for repeated disconnections and reassemblies without loss of sealing on both mechanical and pneumatic sides. Its nickel-plated brass construction, NBR sealing, and specification for vacuum/air service up to 16 bar and â20Â°C to +80Â°C support reliable retention of seals through multiple uses, making it suitable for frequent assembly/disassembly in pneumatic systems.

Can the "T" plug tee through, type R5 maintain airtight and mechanical seals after many reseatings?

Yes. The "T" plug tee through, type R5 is designed for repeated reseatings without loss of sealing on both the mechanical and pneumatic sides. Constructed of nickel-plated brass with NBR seals, it supports vacuum and air up to 16 bar and operates between -20Â°C and +80Â°C, making it suitable for multiple assemblies while maintaining airtight and mechanical integrity.

Is the "T" plug tee through, type R5 suitable for continuous use in pneumatic systems at 16 bar without seal wear?

Based on the provided description, the "T" plug tee through, type R5 appears designed for repeated assembly/disassembly without loss of sealing on both mechanical and pneumatic sides. Key points supporting suitability for continuous use at 16 bar: - Working pressure is specified as 16 bar, so the part is rated for that pressure. - Sealing material is NBR (nitrile rubber), commonly used in pneumatic applications and compatible with air and vacuum. - Material is nickel-plated brass, which provides good mechanical strength and corrosion resistance for typical pneumatic environments. - Operating temperature range (â20Â°C to +80Â°C) covers normal pneumatic system conditions where NBR performs well. Caveats and practical considerations: - NBR seals have finite wear and can degrade with certain oils, aggressive chemicals, high temperatures, or abrasive particulates. If the system contains oil, contaminants, or extreme cycles of pressure/temperature, seal life may be reduced. - Continuous dynamic movement or frequent push/pull cycles at the seal interface can increase wear; although the description claims multiple assemblies without sealing loss, actual lifetime depends on cycle frequency and handling. - Proper installation, cleanliness, and maintenance are essential to achieve expected service life at 16 bar. - If absolute assurance of long-term continuous duty is required, consider requesting manufacturerâs fatigue/wear data, cycle-life testing, or using more wear-resistant seal materials (e.g., FKM) if compatible. Conclusion: The "T" plug tee through, type R5 is specified for 16 bar and uses NBR seals, so it is suitable for continuous use at 16 bar in typical pneumatic systems, provided the medium, temperature, and operating conditions do not accelerate NBR seal wear. For harsh conditions or high cycle counts, verify manufacturer test data or consider alternative seal materials.

“T” plug tee through, type R5

All products, Push-in fittings/

Additional information

Material	B – brass (bronze)

T-type inline plug connector, type R5, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2005002	R5 tee connector 5 mm hose	-	16	In stock	Enquiry
MW-2005006	RL5 tee connector 12 mm hose	-	16	In stock	Enquiry
MW-2005007	RL5 tee connector 14 mm hose	-	16	In stock	Enquiry
MW-2005A01	R5 tee connector 3.17 mm hose	-	16	In stock	Enquiry
MW-2005A02	R5 tee connector 3 mm hose	-	16	In stock	Enquiry
MW-2L05001	RL5 tee connector 4 mm hose	-	16	In stock	Enquiry
MW-2L05003	RL5 tee connector 6 mm hose	-	16	In stock	Enquiry
MW-2L05004	RL5 tee connector 8 mm hose	-	16	In stock	Enquiry
MW-2L05005	RL5 tee connector 10 mm hose	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

T-type inline plug connector, type R5, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.