Is the Lance without head for high pressure cleaner, inlet GZ 1/4" BSP, stainless steel, type MT2 suitable for continuous use at 280 bar and 150Â°C?

Based on the provided description, the Lance without head for high pressure cleaner, inlet GZ 1/4" BSP, stainless steel, type MT2 is specified for working pressure up to 280 bar and operating temperature up to +150Â°C. If your usage does not exceed these limits (280 bar and 150Â°C) and the lance is installed and maintained according to manufacturer instructions, it is suitable for continuous use at those conditions. However, for true continuous-duty operation consider these points before final approval: - Confirm material and seals are rated for prolonged exposure to 150Â°C (stainless steel body is suitable, but seals/insulation materials must also withstand that temperature). - Verify thermal insulation (MT2) performance under continuous load to avoid operator burn risk and heat transfer issues. - Ensure connections (GZ 1/4" BSP) and any fittings are rated for continuous 280 bar and high-temperature service. - Check manufacturer guidance or certification for continuous operation at maximum ratings; rated limits do not always guarantee long-term continuous use without accelerated wear. If manufacturer documentation or certification explicitly states continuous-duty suitability at 280 bar and 150Â°C, then the lance is appropriate. Otherwise obtain confirmation from the manufacturer or supplier.

Can Lance without head for high pressure cleaner, inlet GZ 1/4" BSP, stainless steel, type MT2 withstand 40 l/min at 280 bar and 150Â°C continuously?

Yes. Lance without head for high pressure cleaner, inlet GZ 1/4" BSP, stainless steel, type MT2 Format specification lists working pressure up to 280 bar, flow rate 40 l/min and operating temperature up to +150Â°C. Based on that description, it is rated to withstand 40 l/min at 280 bar and 150Â°C continuously. Ensure fittings, seals and connected components are also rated for these conditions and follow manufacturer installation/maintenance guidelines for safe continuous operation.

Lance without head for high pressure cleaner, inlet GZ 1/4″ BSP, stainless steel, type MT2

All products, Guns for high-pressure washers/

Additional information

Lance without a nozzle with MT2 thermal insulation intended for a high-pressure washer. Connections: (inlet) GZ 1/4″ BSP / (outlet) GZ 1/4″ BSP. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: stainless steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MH-140154	Insulated lance MT2 stainless steel	-	280	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lance without a nozzle with MT2 thermal insulation intended for a high-pressure washer. Connections: (inlet) GZ 1/4″ BSP / (outlet) GZ 1/4″ BSP. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: stainless steel.