What hose sizes and EC ferrule diameter ranges does the UPJ manual hose crimper support, and is the EC-100271 base required?

The UPJ manual hose crimper supports crimping textile-reinforced hoses in two ranges: - DN 4â8, compatible with EC ferrules having internal diameters 10â17 mm - DN 8â10, compatible with EC ferrules having internal diameters 16â22 mm The EC-100271 base is optional and can be purchased additionally; it is not required as standard equipment.

Can the UPJ manual hose crimper be fitted with additional jaw sets for other hose sizes beyond the supplied DN 4â8 and DN 8â10?

Yes. The UPJ manual hose crimper is supplied with two jaw sets covering DN 4â8 and DN 8â10 (EC ferrule ID ranges 10â17 mm and 16â22 mm). You can expand its capability by purchasing the additional base with index EC-100271 for the press, which allows fitting other jaw sets for different hose sizes.

Does the UPJ manual hose crimper include jaws for EC ferrules outside the 10â22 mm range?

No. The UPJ manual hose crimper is standardly supplied with two sets of jaws covering EC ferrule internal diameters from 10 mm to 22 mm (DN 4â8: 10â17 mm and DN 8â10: 16â22 mm). Ferrules outside the 10â22 mm range are not included; however, an additional base (index EC-100271) can be purchased for the press, which may allow use of other tooling.

UPJ manual hose crimper

Additional information

The manual crimping tool UPJ is designed for crimping hoses with textile reinforcement using EC type ferrules. It is standardly equipped with two sets (of 6 crimping segments each) of jaws for the internal diameters of crimped hoses: DN 4 ÷ 8 (range of internal diameters of EC ferrules: 10 ÷ 17 mm), DN 8 ÷ 10 (range of internal diameters of EC ferrules: 16 ÷ 22 mm). An additional base with index EC-100271 can be purchased for the press.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EC-UPJ	UPJ type clamping press	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

The manual crimping tool UPJ is designed for crimping hoses with textile reinforcement using EC type ferrules. It is standardly equipped with two sets (of 6 crimping segments each) of jaws for the internal diameters of crimped hoses: DN 4 ÷ 8 (range of internal diameters of EC ferrules: 10 ÷ 17 mm), DN 8 ÷ 10 (range of internal diameters of EC ferrules: 16 ÷ 22 mm). An additional base with index EC-100271 can be purchased for the press.