Is the BANJO metric RNM hydraulic end, type ZMB600, AISI 316L steel compatible with standard crimping sleeves for industrial hydraulic hoses?

Yes. The BANJO metric RNM hydraulic end, type ZMB600, AISI 316L steel is designed for crimping in hydraulic and industrial hoses and is compatible with standard crimping sleeves intended for the hose type being used. It features a regular hydraulic tail (type Z) meant to accept crimping sleeves; successful crimping depends on selecting a sleeve sized and specified for the specific hose construction and reinforcement. Also ensure crimping tools and sleeve dimensions match the hose manufacturerâs recommendations and that materials (stainless AISI 316L) are acceptable for the applicationâs pressure, fluid and corrosion requirements.

Can BANJO metric RNM hydraulic end, type ZMB600, AISI 316L steel be used with hoses for corrosive fluids and seawater applications?

Yes. The BANJO metric RNM hydraulic end, type ZMB600, AISI 316L steel is suitable for use with hoses for corrosive fluids and seawater applications. It is designed as a standard hydraulic end (type Z) for crimping with an appropriate crimping sleeve and hose assembly, and AISI 316L stainless steel provides strong corrosion resistance in chloride-containing environments and many aggressive chemicals. Ensure the chosen hose and crimping sleeve materials are also compatible with the specific corrosive fluid and seawater conditions, and confirm crimping specifications and pressure ratings are met for the intended service.

Does BANJO metric RNM hydraulic end, type ZMB600, AISI 316L steel require specific torque settings when screwing onto fittings?

BANJO metric RNM hydraulic end, type ZMB600, AISI 316L steel does not inherently require a specific torque value for screwing onto fittings based solely on its description. Important points: - The ZMB600 is designed for crimping into hoses using a suitable crimp sleeve; the mechanical joint is produced by the crimping process, not by torque on the threaded connection. - Threaded engagement (metric RNM) between the fitting and mating component should follow the torque recommendations of the mating fitting/manufacturer and general practice for the thread size and material (AISI 316L is stainless steel and has different friction characteristics than carbon steel). - If a sealed joint is required, use the manufacturerâs guidance on sealing methods (sealant, PTFE tape, O-rings) and apply torque appropriate for the fitting type to avoid over-tightening, galling, or damaging threads. - For assemblies where pressure ratings and safety are critical, follow hose assembly manufacturer, crimping machine, and fitting supplier specifications (including specified crimp dimensions, inspection, and any recommended final torque values). - If no supplier torque data is available, reference standard torque charts for stainless steel metric threads of the same size and grade as a starting point, and perform validation testing (leak and pull-off tests) on finished assemblies. Conclusion: No unique torque value is specified by the part description; use the mating fittingâs or industry standard torque guidelines and validate the assembled hose according to manufacturer and safety requirements.

BANJO metric RNM hydraulic end, type ZMB600, AISI 316L steel

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), BANJO for screw with metric thread (RNM). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMB600-12-04-SS	End. BANJO M12, hose 1/4", AISI 316L	6	-	In stock	Enquiry
TI-ZMB600-14-04-SS	End. BANJO M14, hose 1/4", AISI 316L	6	-	In stock	Enquiry
TI-ZMB600-16-05-SS	End. BANJO M16, hose 5/16", AISI 316L	8	-	In stock	Enquiry
TI-ZMB600-16-06-SS	End. BANJO M16, hose 3/8", AISI 316L	10	-	In stock	Enquiry
TI-ZMB600-18-06-SS	End. BANJO M18, hose 3/8", AISI 316L	10	-	In stock	Enquiry
TI-ZMB600-18-08-SS	End. BANJO M18, hose 1/2", AISI 316L	12	-	In stock	Enquiry
TI-ZMB600-20-08-SS	End. BANJO M20, hose 1/2", AISI 316L	10	-	In stock	Enquiry
TI-ZMB600-22-08-SS	End. BANJO M22, hose 1/2", AISI 316L	12	-	In stock	Enquiry
TI-ZMB600-26-12-SS	End. BANJO M26, hose 3/4", AISI 316L	20	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), BANJO for screw with metric thread (RNM). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.