Is the Bolt for BANJO metric, carbon steel compatible with standard BANJO Z-end fittings and washers, or can it be used without a washer?

Bolt for BANJO metric, carbon steel Format is designed specifically for BANJO Z-end fittings and is compatible with standard BANJO Z-end washers. The product description "Bolt without washer for BANJO type - Z end, metric. Material: carbon steel, galvanized" indicates the bolt itself is supplied without a washer, so you must use a separate standard BANJO Z-end washer (or a compatible sealing washer) when assembling the BANJO fitting to ensure proper sealing and load distribution. Using the Bolt for BANJO metric, carbon steel Format without a washer is not recommended for BANJO hydraulic or fluid fittings: omission of the washer can lead to poor sealing, leakage, and uneven clamping forces, which may damage the fitting or compromise system integrity. Always pair the bolt with the correct BANJO washer specified for your fitting and application.

Can the Bolt for BANJO metric, carbon steel be safely reused after removal from a Z-end connection?

Bolt for BANJO metric, carbon steel: Reuse after removal from a Z-end connection is not recommended as a general rule. Carbon steel bolts galvanized for corrosion protection can suffer thread damage, galling, or coating loss during installation and removal. In a Z-end BANJO application, proper clamping force and sealing are critical; any deformation, nicks, stretched threads, or compromised galvanizing reduce fatigue strength and corrosion resistance, increasing risk of leakage or failure. If the bolt shows no visible damage, full thread engagement, undistorted shank, intact galvanizing, and meets original torque/inspection criteria, limited reuse may be acceptable in non-critical, low-pressure applications following manufacturer or engineering approval. For safety-critical, high-pressure, or pressurized fluid BANJO connections, always replace with a new Bolt for BANJO metric, carbon steel.

Does the Bolt for BANJO metric, carbon steel require a specific torque value for Z-end installations?

No. The Bolt for BANJO metric, carbon steel does not inherently require a specific torque value for Z-end installations based solely on the product description "Bolt without washer for BANJO type - Z end, metric. Material: carbon steel, galvanized." Torque requirements depend on the application, mating materials, thread size and pitch, surface finish, presence of sealants or lubricants, and the safety or fluid-sealing needs of the assembly. For safe and reliable installation, refer to: - Manufacturer or component specifications (banjo fitting and mating parts) - Standard torque charts for the specific metric thread size and pitch, adjusted for carbon steel and galvanization - Application-specific requirements (e.g., hydraulic systems may require controlled torque to ensure sealing and avoid damage) If no guidance is available, use standard torque values for the boltâs metric thread size and material, apply anti-seize or lubricant factors as appropriate, and verify assembly with functional tests or retorque where required.

Bolt for BANJO metric, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Bolt without washer for BANJO type – Z end, metric. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMB610-10X1	Banjo bolt M10x1	-	-	In stock	Enquiry
TI-ZMB610-10X1,5	Banjo bolt M10x1.5	-	-	In stock	Enquiry
TI-ZMB610-12X1	Banjo bolt M12x1	-	-	In stock	Enquiry
TI-ZMB610-12X1,5	Banjo bolt M12x1.5	-	-	In stock	Enquiry
TI-ZMB610-14X1,5	Banjo bolt M14x1.5	-	-	In stock	Enquiry
TI-ZMB610-16X1,5	Banjo bolt M16x1.5	-	-	In stock	Enquiry
TI-ZMB610-18X1,5	Banjo bolt M18x1.5	-	-	In stock	Enquiry
TI-ZMB610-20X1,5	Banjo bolt M20x1.5	-	-	In stock	Enquiry
TI-ZMB610-22X1,5	Banjo bolt M22x1.5	-	-	In stock	Enquiry
TI-ZMB610-24X1,5	Banjo bolt M24x1.5	-	-	In stock	Enquiry
TI-ZMB610-26X1,5	Banjo bolt M26x1.5	-	-	In stock	Enquiry
TI-ZMB610-30X1,5	Banjo bolt M30x1.5	-	-	In stock	Enquiry