Can BES metric tube end, type ZMR112, heavy series, carbon steel be crimped using a standard hydraulic crimping sleeve for industrial hoses?

Yes. BES metric tube end, type ZMR112, heavy series, carbon steel can be crimped using a standard hydraulic crimping sleeve for industrial hoses, provided the sleeve is suitable for that hose type and size. The fitting is a standard hydraulic end (type Z) with a regular hydraulic tail for the hose, designed for sealing with a cutting ring (BES) and intended for crimping in hydraulic and industrial hoses. Key points to ensure proper crimping: - Use a crimping sleeve compatible with the hose construction (e.g., wire-braid, textile) and nominal diameter. - Follow the hose and sleeve manufacturerâs recommended crimp dimensions and tooling for the specific hose type. - Ensure the cutting ring (BES) is correctly positioned and the fitting is fully inserted before crimping. - Verify material compatibility (carbon steel, galvanized) and operating pressure ratings after assembly. When the correct sleeve and crimping procedure are used, the ZMR112 heavy series fitting can be reliably crimped for industrial hydraulic service.

Is BES metric tube end, type ZMR112, heavy series, carbon steel compatible with crimping machines for hydraulic hose assemblies?

Yes. BES metric tube end, type ZMR112, heavy series, carbon steel is compatible with crimping machines for hydraulic hose assemblies. It is designed for crimping in hydraulic and industrial hoses using an appropriate crimping sleeve matched to the hose type. The fitting uses a regular hydraulic âtailâ (type Z) with metric tube connection and seals with a cutting ring (BES), and its heavy-series construction and galvanized carbon steel material are suitable for standard crimping processes when the correct sleeve and crimping parameters for the specific hose are used. Ensure the crimper and sleeve dimensions correspond to the hose and ZMR112 specifications and follow manufacturer guidelines for crimp diameters and pressures.

BES metric tube end, type ZMR112, heavy series, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic end (type Z – with a regular hydraulic “tail” for the hose), with a metric tube, sealing with a cutting ring (BES), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMR112-08-04	End cap 8 mm, hose 1/4", heavy	6	-	In stock	Enquiry
TI-ZMR112-10-04	End cap 10 mm, hose 1/4", heavy	6	-	In stock	Enquiry
TI-ZMR112-12-04	End cap 12 mm, hose 1/4", heavy	6	-	In stock	Enquiry
TI-ZMR112-12-05	End cap 12 mm, hose 5/16", heavy	8	-	In stock	Enquiry
TI-ZMR112-14-06	End cap 14 mm, hose 3/8", heavy	10	-	In stock	Enquiry
TI-ZMR112-14-08	End cap 14 mm, hose 1/2", heavy	12	-	In stock	Enquiry
TI-ZMR112-16-08	End cap 16 mm, hose 1/2", heavy	12	-	In stock	Enquiry
TI-ZMR112-20-06	End cap 20 mm, hose 3/8", heavy	10	-	In stock	Enquiry
TI-ZMR112-20-10	End cap 20 mm, hose 5/8", heavy	16	-	In stock	Enquiry
TI-ZMR112-20-12	End cap 20 mm, hose 3/4", heavy	20	-	In stock	Enquiry
TI-ZMR112-25-12	End cap 25 mm, hose 3/4", heavy	20	-	In stock	Enquiry
TI-ZMR112-25-16	End cap 25 mm, hose 1", heavy	25	-	In stock	Enquiry
TI-ZMR112-30-16	End cap 30 mm, hose 1", heavy	25	-	In stock	Enquiry
TI-ZMR112-38-20	End cap 38 mm, hose 1.1/4", heavy	32	-	In stock	Enquiry
TI-ZMR112-38-24	End cap 38 mm, hose 1.1/2", heavy	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for the hose), with a metric tube, sealing with a cutting ring (BES), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.