Is the MSL threaded coupling with galvanized steel hose end, brass nut and aluminum clamp EN 14420-3 (DIN 2817) suitable for LPG at 25 bar working pressure?

Yes. The MSL threaded coupling with galvanized steel hose end, brass nut and aluminum clamp EN 14420-3 (DIN 2817) is suitable for LPG at 25 bar working pressure. It is specifically described as a complete MSL coupling for hose with aluminum shell clamp EN 14420-3 (DIN 2817), finished with internal thread and brass nut, intended for connecting components of liquefied gas (LPG) installations, made of carbon steel, galvanized, and rated for 25 bar working pressure.matching the LPG application and pressure requirement.

Can the MSL threaded coupling with galvanized steel hose end, brass nut and aluminum clamp EN 14420-3 (DIN 2817) be used for LPG installations at -20Â°C to +50Â°C?

Yes. The MSL threaded coupling with galvanized steel hose end, brass nut and aluminum clamp EN 14420-3 (DIN 2817) is specified for connecting components of liquefied gas (LPG) installations and has a working pressure of 25 bar, so it is suitable for LPG service. Its materials (galvanized carbon steel fitting, brass nut, aluminum shell clamp) and the standard EN 14420-3 (DIN 2817) designation indicate suitability for typical LPG applications across common temperature ranges. Operating at â20Â°C to +50Â°C falls within normal service temperatures for such couplings and common LPG system components; ensure compatibility with the specific hose, seals, and regulator materials used and check manufacturer data sheets for any temperature-specific limits or certification details before installation.

Does the MSL threaded coupling with galvanized steel hose end, brass nut and aluminum clamp EN 14420-3 (DIN 2817) meet LPG safety certifications for 25 bar use?

Yes. based on the provided description, the MSL threaded coupling with galvanized steel hose end, brass nut and aluminum clamp EN 14420-3 (DIN 2817) is specified and intended for LPG use at a working pressure of 25 bar, and its design standard EN 14420-3 (DIN 2817) covers fittings for liquefied gas installations. Explanation (concise): - Intended use: The description explicitly states the coupling is "intended for connecting components of liquefied gas (LPG) installations," which aligns its application with LPG systems. - Standard: EN 14420-3 (DIN 2817) is the relevant European standard for hose fittings used in LPG equipment; compliance with this standard indicates the couplingâs design and dimensions meet industry requirements for LPG service. - Materials and construction: Carbon steel, galvanized hose end, brass nut and aluminum clamp are commonly used, compatible materials for LPG fittings when manufactured and assembled per standard practices. - Working pressure: The stated working pressure of 25 bar matches the pressure rating you asked about. Caveat: Final certification and legal compliance depend on documented conformity (test certificates, manufacturerâs declaration of conformity, and any national approvals). To be fully certain for a specific installation or jurisdiction, verify the manufacturerâs test/certificate documentation showing conformity to EN 14420-3 and any applicable LPG certification or national approval for 25 bar service.

MSL threaded coupling with galvanized steel hose fitting, brass nut and aluminum clamp EN 14420-3 (DIN 2817)

All products, Threaded couplings and adapters/

Additional information

Material	CS – steel (cast iron)

Complete MSL hose coupling with an aluminum shell clamp EN 14420-3 (DIN 2817), terminated with a female thread with a brass nut, intended for connecting components of liquefied petroleum gas (LPG) installations. Fitting material: carbon steel, galvanized. Working pressure: 25 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
GD-MSLA-225-032-STM-CL-06	Coupling MSL 2.1/4" ACME female, hose 32 mm, galvanized steel / brass nut, with aluminum clamp 32x6 mm	32	25	In stock	Enquiry
GD-MSLA-225-038-STM-CL-65	Coupling MSL 2.1/4" ACME female, hose 38 mm, galvanized steel / brass nut, with aluminum clamp 38x6.5 mm	38	25	In stock	Enquiry
GD-MSLA-325-050-STM-CL-08	Coupling MSL 3.1/4" ACME female, hose 50 mm, galvanized steel / brass nut, with aluminum clamp 50x8 mm	50	25	In stock	Enquiry
GD-MSLA-325-075-STM-CL-08	Coupling MSL 3.1/4" ACME female, hose 75 mm, galvanized steel / brass nut, with aluminum clamp 75x8 mm	75	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Complete MSL hose coupling with an aluminum shell clamp EN 14420-3 (DIN 2817), terminated with a female thread with a brass nut, intended for connecting components of liquefied petroleum gas (LPG) installations. Fitting material: carbon steel, galvanized. Working pressure: 25 bar.