Is the Non-freezing pressure washer gun with 1/4" BSP GW outlet, AURA, safe to use with both hot water up to +160Â°C and cold water without special adjustments?

Yes. The Non-freezing pressure washer gun with 1/4" BSP GW outlet, AURA is specified for use with both hot and cold water and has an operating temperature rating up to +160Â°C, so it is safe to use with hot water up to that temperature and with cold water without special adjustments. The gunâs materials and design (high-strength plastic housing, lever mechanism, rated working pressure up to 180 bar and maximum 210 bar) support industrial hot- and cold-water applications. Ensure your systemâs pressure and temperature do not exceed the stated limits and follow any local safety and installation practices; if your application approaches the maximum ratings, consult the manufacturer for confirmation.

Can the Non-freezing pressure washer gun with 1/4" BSP GW outlet, AURA, be used continuously at 180 bar working pressure without additional cooling?

Non-freezing pressure washer gun with 1/4" BSP GW outlet, AURA can operate at a working pressure up to 180 bar and temperatures up to +160Â°C. The spec does not state a required duty cycle or builtâin cooling. Continuous use at 180 bar is technically within its rated working pressure, but without explicit manufacturer guidance on continuous operation or cooling, continuous heavy-duty use at maximum parameters may shorten service life or risk overheating of internal seals and components. For safe continuous operation at 180 bar, confirm with the manufacturer or supplier whether a cooling system or duty-cycle limits are required; if unavailable, avoid prolonged continuous use at maximum pressure/temperature.

Does the Non-freezing pressure washer gun with 1/4" BSP GW outlet, AURA, require specific maintenance after use with hot water?

No. The Non-freezing pressure washer gun with 1/4" BSP GW outlet, AURA, does not require any special maintenance after use with hot water beyond standard, sensible care. Because it is designed for both hot and cold water and rated for operating temperatures up to +160Â°C, normal post-use steps are sufficient: flush the gun with clean water to remove detergents or residues, allow it to cool if still hot, check seals and connections for wear or leaks, and store it dry and protected. Inspect Oârings and threads periodically and replace if damaged. No additional or unusual procedures specific to hot-water use are indicated by the product description.

Non-freezing pressure washer gun with 1/4″ BSP GW outlet, AURA

All products, Guns for high-pressure washers/

Additional information

Standard length [m]	10

Non-freezing high-pressure water gun AURA for industrial applications. Suitable for hot and cold water. The lever mechanism does not require the operator to exert significant force, resulting in comfortable and pleasant operation. The outlet part is finished with a 1/4″ BSP internal thread. The gun is available in versions with a fixed or rotating connection to the installation. Housing material: high-strength plastic. Working pressure: up to 180 bar. Maximum pressure: 210 bar. Flow rate: 30 l/min. Operating temperature: up to +160°C.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
MH-1011090117	Non-freezing water gun AURA, type AF0.6, inlet GW 3/8" BSP	-	180
MH-1011090217	Non-freezing water gun AURA, type AF1.1, inlet GW 3/8" BSP	-	180
MH-1011090317	Non-freezing water gun AURA, type AF1.8, inlet GW 3/8" BSP	-	180
MH-1011090417	Non-freezing water gun AURA, type AF0.6, inlet GW 3/8" BSP swivel.	-	180
MH-1011090517	Non-freezing water gun AURA, type AF1.1, inlet GW 3/8" BSP swivel.	-	180
MH-1011090617	Non-freezing water gun AURA, type AF1.8, inlet GW 3/8" BSP swivel.	-	180

Non-freezing high-pressure water gun AURA for industrial applications. Suitable for hot and cold water. The lever mechanism does not require the operator to exert significant force, resulting in comfortable and pleasant operation. The outlet part is finished with a 1/4″ BSP internal thread. The gun is available in versions with a fixed or rotating connection to the installation. Housing material: high-strength plastic. Working pressure: up to 180 bar. Maximum pressure: 210 bar. Flow rate: 30 l/min. Operating temperature: up to +160°C.