What is the required pilot supply pressure for the Valve with NAMUR connection pneumatically controlled, monostable 5/2 to operate reliably?

The required pilot supply pressure for the Valve with NAMUR connection pneumatically controlled, monostable 5/2 to operate reliably is a minimum of 2.5 bar. Operating conditions noted: operating temperature â10Â°C to +60Â°C and nominal flow 1100 l/min (at inlet pressure 6 bar with Îp = 1 bar).

Can the Valve with NAMUR connection pneumatically controlled, monostable 5/2 be mounted directly on actuators without additional adapters?

Yes. The Valve with NAMUR connection pneumatically controlled, monostable 5/2 is designed for direct mounting on pneumatic actuators without additional adapters. Its NAMUR interface allows the valve to be fitted directly to the actuator body, providing a compact, standardized connection for control. Ensure the actuator follows NAMUR mounting dimensions and that pilot supply pressure (minimum 2.5 bar) and operating temperature (-10Â°C to +60Â°C) are compatible with your system.

Does the Valve with NAMUR connection pneumatically controlled, monostable 5/2 support media other than compressed air?

Valve with NAMUR connection pneumatically controlled, monostable 5/2. based on the given description, this valve is intended for use with compressed air only. The materials (aluminum body, nickel-plated aluminum slider, NBR seals, HostaformÂ® end cover), the stated minimum pilot supply pressure (2.5 bar), operating temperature range (â10 Â°C to +60 Â°C) and nominal flow rating are all specified for pneumatic (compressed air) service. NBR seals and HostaformÂ® have limited chemical compatibility and temperature tolerance compared with seals designed for liquids or aggressive gases, so use with other media (oils, hydraulic fluids, steam, corrosive or flammable gases, liquids with particulates) is not recommended without manufacturer confirmation. If you need to use a different medium, consult the valve manufacturer or datasheet for approved media and compatibility information, and consider valves specifically rated for the intended fluid, compatible seal materials and appropriate pressure/temperature limits.

Valve with NAMUR connection pneumatically controlled, monostable 5/2

All products, Pneumatic valves/

Additional information

Maximum operating temperature [°C]	60
Minimum operating temperature [°C]	-10

Pneumatically adjustable NAMUR valve, used for controlling pneumatic actuators. Its connection allows for direct mounting of valves on the actuator body. Function 5/2 – five-way, two-position. Material: valve body – aluminum, slider – nickel-plated aluminum, sealing – NBR, end cover – Hostaform®. Minimum pilot supply pressure: 2.5 bar. Operating temperature: -10°C to +60°C. Nominal flow: 1100 l/min (at inlet pressure 6 bar Δp = 1 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MW-7021010100	NAMUR valve PNV A5 PNS OO	-	10	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Pneumatically adjustable NAMUR valve, used for controlling pneumatic actuators. Its connection allows for direct mounting of valves on the actuator body. Function 5/2 – five-way, two-position. Material: valve body – aluminum, slider – nickel-plated aluminum, sealing – NBR, end cover – Hostaform®. Minimum pilot supply pressure: 2.5 bar. Operating temperature: -10°C to +60°C. Nominal flow: 1100 l/min (at inlet pressure 6 bar Δp = 1 bar).