Can VICTORIAÂ® saturated and superheated steam delivery hose be used with dry steam cleaners or only with proper water vapor screw-on fittings?

VICTORIAÂ® saturated and superheated steam delivery hose is not intended for use with dry steam cleaners. For dry steam cleaners use separate hoses specified for that application. For water vapor (wet steam) use only the special screw-on fittings designed for water vapor. To maximize service life, empty the VICTORIAÂ® hose of steam after use to prevent condensate buildup.

Can VICTORIAÂ® saturated and superheated steam delivery hose be safely used at temperatures up to +232Â°C for short periods?

Yes - VICTORIAÂ® saturated and superheated steam delivery hose can be used safely at temperatures up to +232Â°C only for short, temporary periods. Its normal operating range is â40Â°C to +210Â°C, with the manufacturer allowing brief exposure to +232Â°C. Ensure correct fittings (use special screw-on fittings for water vapor), avoid use with dry steam cleaners, empty the hose after use to prevent condensate buildup, and respect the 18 bar working pressure and other installation/maintenance guidelines to maintain safety and service life.

Can VICTORIAÂ® saturated and superheated steam delivery hose be safely stored outdoors without additional protection from weather and UV?

Yes. VICTORIAÂ® saturated and superheated steam delivery hose can be stored outdoors without additional protection because its outer layer is made of weather- and high-temperature-resistant micro-perforated EPDM rubber and the hose is designed for demanding steam service. The specified operating temperature range (â40Â°C to +210Â°C, temporarily to +232Â°C) and robust double steel-wire reinforcement support outdoor exposure. However, to ensure safe long-term performance and maximize service life, observe these precautions: - Drain the hose of steam after each use to prevent condensate buildup and internal corrosion. - Avoid prolonged, direct UV exposure where possible (EPDM resists weathering well but extended UV can still age rubber over many years). - Store off the ground and supported to prevent kinking or mechanical damage. - Protect fittings (use appropriate water-vapor screw-on fittings for water vapor) and keep couplings clean and dry. - Inspect regularly for external damage, wear, or deterioration. Following these recommendations allows outdoor storage while minimizing degradation and maintaining safe operation.

VICTORIA® saturated and superheated steam delivery hose

All products, Steam hoses/

Additional information

Material	EPDM – ethylene-propylene-diene rubber
Maximum operating temperature [°C]	210
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	5, 50, 60, 60 / 120, 60/ 120
Reinforcement	2 steel braids

High-pressure delivery hose, reinforced with steel, designed for conveying superheated steam. The outer layer is resistant to high temperatures and weather conditions. Not intended for steam cleaners (“dry steam cleaners”). For water vapor, use special screw-on fittings designed for water vapor. To extend the lifespan, the hose should be emptied of steam after use to avoid condensate buildup. Standard length: 60 m (or 120 m – contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double cord of steel wire. Outer layer: black or red micro-perforated EPDM rubber. Working pressure: 18 bar. Operating temperature: from -40°C to +210°C (temporarily up to +232°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
IV-VICTORIA-008	VICTORIA hose 8x20 mm	8	18	In stock	Enquiry
IV-VICTORIA-010	VICTORIA hose 10x22 mm	10	18	In stock	Enquiry
IV-VICTORIA-010R	VICTORIA hose 10x22 mm, red	10	18	In stock	Enquiry
IV-VICTORIA-013	VICTORIA hose 13x25 mm	12	18	In stock	Enquiry
IV-VICTORIA-013R	VICTORIA hose 13x25 mm, red	12	18	In stock	Enquiry
IV-VICTORIA-016	VICTORIA hose 16x27 mm	16	18	In stock	Enquiry
IV-VICTORIA-019	VICTORIA hose 19x31 mm	20	18	In stock	Enquiry
IV-VICTORIA-019R	VICTORIA hose 19x31 mm, red	20	18	In stock	Enquiry
IV-VICTORIA-025	VICTORIA hose 25x37 mm	25	18	In stock	Enquiry
IV-VICTORIA-025R	VICTORIA hose 25x37 mm, red	25	18	In stock	Enquiry
IV-VICTORIA-032	VICTORIA hose 32x44.5 mm	32	18	In stock	Enquiry
IV-VICTORIA-032R	VICTORIA hose 32x44.5 mm, red	32	18	In stock	Enquiry
IV-VICTORIA-038	VICTORIA hose 38x52 mm	38	18	In stock	Enquiry
IV-VICTORIA-038R	VICTORIA hose 38x52 mm, red	38	18	In stock	Enquiry
IV-VICTORIA-051	VICTORIA hose 51x65.5 mm	50	18	In stock	Enquiry
IV-VICTORIA-051R	VICTORIA hose 51x65.5 mm, red	50	18	In stock	Enquiry
IV-VICTORIA-063	VICTORIA hose 63.5x81.5 mm	65	18	In stock	Enquiry
IV-VICTORIA-076	VICTORIA hose 76x96.5 mm	75	18	In stock	Enquiry
IV-VICTORIA-102	VICTORIA hose 102x124 mm	100	18	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-pressure delivery hose, reinforced with steel, designed for conveying superheated steam. The outer layer is resistant to high temperatures and weather conditions. Not intended for steam cleaners (“dry steam cleaners”). For water vapor, use special screw-on fittings designed for water vapor. To extend the lifespan, the hose should be emptied of steam after use to avoid condensate buildup. Standard length: 60 m (or 120 m – contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double cord of steel wire. Outer layer: black or red micro-perforated EPDM rubber. Working pressure: 18 bar. Operating temperature: from -40°C to +210°C (temporarily up to +232°C).

Additional information

Material	EPDM – ethylene-propylene-diene rubber
Maximum operating temperature [°C]	210
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	5, 50, 60, 60 / 120, 60/ 120
Reinforcement	2 steel braids