Is the Quick connector DN7.2 Eurostandard without valve, threaded, brass, 26KA series compatible with other manufacturers' DN7.2â7.8 couplings?

Yes. The Quick connector DN7.2 Eurostandard without valve, threaded, brass, 26KA series is compatible with other manufacturersâ DN7.2â7.8 Eurostandard couplings. The product description states these quick couplings are interchangeable with all Eurostandard DN7.2â7.8 couplings, and they share the common profile and operating parameters (suitable for air, brass construction, 35 bar working pressure, â20Â°C to +100Â°C).

Can the Quick connector DN7.2 Eurostandard without valve, threaded, brass, 26KA series be used safely for temperatures between -20Â°C and +100Â°C?

Yes. The Quick connector DN7.2 Eurostandard without valve, threaded, brass, 26KA series is specified for an operating temperature range from -20Â°C to +100Â°C and a working pressure of 35 bar. Made of brass and designed for air with Eurostandard DN7.2 compatibility, it can be used safely within that temperature range provided you also respect the pressure rating and application-specific factors (media, cycling, seals, and installation).

Does the Quick connector DN7.2 Eurostandard without valve, threaded, brass, 26KA series require lubrication for optimal operation?

No. the Quick connector DN7.2 Eurostandard without valve, threaded, brass, 26KA series does not require routine lubrication for normal operation. It is a brass Eurostandard DN7.2 quick coupling plug designed primarily for air, rated to 35 bar and specified to operate from â20Â°C to +100Â°C. Brass construction and the intended pneumatic service mean the coupling is ready for use without additional lubrication under typical conditions. However, consider these practical points: - If the environment is dirty, corrosive, or the coupling is used with other media than clean compressed air, occasional light lubrication of sliding seals or Oârings (manufacturerâapproved pneumatic grease) can help maintain ease of connection and extend seal life. - Avoid overâlubrication and incompatible oils/greases that can degrade seals or attract contaminants. - Inspect seals and threaded connections periodically and replace worn Oârings to ensure reliable sealing and operation. In normal pneumatic applications, no special lubrication is required for the Quick connector DN7.2 Eurostandard without valve, threaded, brass, 26KA series.

Plug quick coupling DN7.2 Eurostandard without valve, with a thread, brass, series 26KA

All products, General-purpose low-pressure quick couplings/

Additional information

Material	B – brass (bronze)

Plug quick coupling with a popular Eurostandard DN7.2 profile without valve, with a BSP male or female thread, intended primarily for air. quick coupling are interchangeable of all acc. to Eurostandard DN7.2 ÷ 7.8 from other manufacturers. Working pressure: 35 bar. Material: brass. Operating temperature: from -20°C to +100°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RE-26SFAW10MXX	Quick coupling plug 26SF DN7.2, 1/8" BSP male, brass	-	35	In stock	Enquiry
RE-26SFAW13MXX	Quick coupling plug 26SF DN7.2, 1/4" BSP male, brass	-	35	In stock	Enquiry
RE-26SFAW17MXX	Quick coupling plug 26SF DN7.2, 3/8" BSP male, brass	-	35	In stock	Enquiry
RE-26SFAW21MXX	Quick coupling plug 26SF DN7.2, 1/2" BSP male, brass	-	35	In stock	Enquiry
RE-26SFIW10MXX	Quick coupling plug 26SF DN7.2, 1/8" BSP female, brass	-	35	In stock	Enquiry
RE-26SFIW13MXX	Quick coupling plug 26SF DN7.2, 1/4" BSP female, brass	-	35	In stock	Enquiry
RE-26SFIW17MXX	Quick coupling plug 26SF DN7.2, 3/8" BSP female, brass	-	35	In stock	Enquiry
RE-26SFIW21MXX	Quick coupling plug 26SF DN7.2, 1/2" BSP female, brass	-	35	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug quick coupling with a popular Eurostandard DN7.2 profile without valve, with a BSP male or female thread, intended primarily for air. quick coupling are interchangeable of all acc. to Eurostandard DN7.2 ÷ 7.8 from other manufacturers. Working pressure: 35 bar. Material: brass. Operating temperature: from -20°C to +100°C.