Is the NiTO 1/2" water quick connector plug with GZ, brass suitable for use with potable water at temperatures up to 80Â°C and pressures up to 25 bar?

Yes. The NiTO 1/2" water quick connector plug with GZ, brass is described as a high-quality quick-connect water plug made of chrome-plated brass with a working pressure up to 25 bar and an operating temperature up to +80Â°C. Based on that specification, it is suitable for use with potable (drinking) water at temperatures up to 80Â°C and pressures up to 25 bar, provided there are no additional restrictions from local regulations or specific certification requirements for drinking-water fittings in your jurisdiction. If certification for potable water (e.g., WRAS, ACS, NSF) is required for your installation, verify the productâs compliance with those standards before use.

Can the NiTO 1/2" water quick connector plug with GZ, brass withstand corrosive or aggressive water conditions at up to 80Â°C and 25 bar?

NiTO 1/2" water quick connector plug with GZ, brass is made of chromeâplated brass and is rated for operation up to +80Â°C and working pressure up to 25 bar, so it is suitable for hot and pressurized water within those limits. However, chromeâplated brass offers only limited resistance to strongly corrosive or aggressive media (highly acidic, alkaline, chlorideârich or chemically aggressive waters). For prolonged exposure to strongly corrosive conditions, specialized materials (e.g., stainless steel grades or corrosionâresistant alloys) or protective coatings are recommended. If your water contains aggressive chemicals or high chloride/salt content, verify compatibility with the supplier or choose a connector specified for aggressive media.

Does the NiTO 1/2" water quick connector plug with GZ, brass require specific maintenance for use at 80Â°C and 25 bar?

No special or additional maintenance is required beyond standard care for brass quick-connect fittings when using the NiTO 1/2" water quick connector plug with GZ, brass at 80Â°C and 25 bar, provided those conditions do not exceed the stated limits ("working pressure: up to 25 bar; operating temperature: up to +80Â°C"). Recommended routine practices to ensure reliable performance and longevity: - Inspect visually before use for damage, corrosion or debris on threads and sealing surfaces. - Clean mating parts and connector surfaces to remove dirt, scale or deposits that could impair sealing. - Use compatible sealing materials (PTFE tape or suitable thread sealant) on the external thread if required by the system; avoid sealants that attack brass. - Ensure proper assembly torqueâhand-tight plus appropriate wrench snugnessâwithout over-tightening to prevent thread or body damage. - Periodically check for leaks during initial pressurization and in regular intervals thereafter; tighten or reseal as needed. - If operating near the upper temperature limit frequently, inspect more often for accelerated wear, softening of any non-metallic components (o-rings, if present), or changes in plating. - Avoid exposure to aggressive chemicals or highly chlorinated, acidic or alkaline fluids that can cause dezincification or corrosion of brass; if such fluids are present, consider compatible materials. - Store spare connectors dry and protected from contaminants and mechanical damage. Following these routine maintenance and inspection steps will keep the NiTO 1/2" water quick connector plug with GZ, brass performing safely and reliably at the specified 80Â°C and 25 bar limits.

NiTO 1/2″ water quick connector plug with GZ, brass

All products, Quick couplings for water/

Additional information

Material	B – brass (bronze)

High-quality quick-connect water plug NiTO 1/2″ with external thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NT-53640A3	1/2" quick coupling plug with 1/2" BSP female thread, chrome-plated brass	-	25	In stock	Enquiry
NT-5364AA3	1/2" quick coupling plug with 3/4" BSP female thread, chrome-plated brass	-	25	In stock	Enquiry
NT-5364BA3	1/2" quick coupling plug with 3/8" BSP female thread, chrome-plated brass	-	25	In stock	Enquiry
NT-5364NA3	1/2" quick coupling plug with GZ M28x1, chrome-plated brass	-	25	In stock	Enquiry
NT-5364TA3	1/2" quick coupling plug with check valve, with GZ 3/4" BSP, chrome-plated brass	-	25	In stock	Enquiry
NT-5366AA3	Quick coupling plug 1/2" with GZ M24x1, chrome-plated brass	-	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-quality quick-connect water plug NiTO 1/2″ with external thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.