Is the Swivel connector with two independent paths, brass compatible with hydraulic systems at 12 bar and temperatures from -10Â°C to +80Â°C?

Yes. The Swivel connector with two independent paths, brass is specified for a working pressure of 12 bar and an operating temperature range of -10Â°C to +80Â°C, so within those limits it is compatible with hydraulic systems operating at that pressure and temperature. The material is nickel-plated brass and both inlet and outlet have internal BSP threads; ensure the BSP thread sizes and types match your system fittings and that the hydraulic fluid is compatible with nickel-plated brass. Also verify dynamic factors (duty cycle, vibration, rotational speed), required seals, and any safety margins for pressure or temperature excursions beyond the stated ratings.

Can the Swivel connector with two independent paths, brass handle fluids with BSP internal threads at both inlet and outlet under 12 bar?

Yes. The Swivel connector with two independent paths, brass, with internal BSP threads at both inlet and outlet is rated for a working pressure of 12 bar and is made of nickelâplated brass, so it can handle fluids at up to 12 bar within the specified operating temperature range (â10Â°C to +80Â°C). Ensure fluid compatibility with nickelâplated brass and verify thread sealing and installation torque to maintain pressure integrity.

Does the Swivel connector with two independent paths, brass support continuous use at 12 bar and -10Â°C to +80Â°C?

Yes. The Swivel connector with two independent paths, brass supports continuous use at 12 bar and in the temperature range from â10 Â°C to +80 Â°C. The product specification lists a working pressure of 12 bar and an operating temperature range of â10 Â°C to +80 Â°C, and its material is nickel-plated brass, which is compatible with those pressurization and temperature limits for typical fluid-transfer applications. Ensure that installation, sealing elements (e.g., O-rings), connected components, and the specific media are also compatible with these conditions; if aggressive fluids, cyclic thermal stresses, or special safety margins are involved, consult the manufacturer for suitability and certification for continuous-duty service.

Swivel connector with two independent paths, brass

All products, Accessories for pneumatic fittings/

Additional information

Material	B – brass (bronze)

Rotary joint with two independent paths, internal BSP threads at the inlet, internal BSP threads at the outlet. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: nickel-plated brass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MW-W0514101101	Rotary joint with 2 separate paths, 2 x G 1/8" BSP / 2 x G 1/8" BSP, nickel-plated brass	-	12	In stock	0 zł		Enquiry
MW-W0514121121	Rotary joint with 2 separate paths 2 x G 1/4" BSP / 2 x G 1/4" BSP, nickel-plated brass	-	12	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Rotary joint with two independent paths, internal BSP threads at the inlet, internal BSP threads at the outlet. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: nickel-plated brass.