Can SAE 3000 flange end, type ZSK111, light series, carbon steel be crimped with standard hydraulic crimping sleeves for industrial hoses?

Yes . a SAE 3000 flange end, type ZSK111, light series, carbon steel can be crimped with standard hydraulic crimping sleeves intended for industrial hoses, provided the sleeve is specifically suitable for the hose type and size. The product description for SAE 3000 collar end (SFL), lightweight series explicitly states it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve appropriate for the hose. Ensure the chosen sleeve matches the hose construction (e.g., single- or multi-wire braid, textile), hose inner diameter, and pressure rating. Use correct tooling and follow manufacturer crimp specifications (crimp diameter/profile, number of crimp points, and sequence). Verify material compatibility (carbon steel, galvanized) and perform post-crimp inspections and pressure tests to confirm seal integrity and safety.

Is SAE 3000 flange end, type ZSK111, light series, carbon steel compatible with crimping sleeves specified for lightweight industrial hoses?

Yes - SAE 3000 flange end, type ZSK111, light series, carbon steel is compatible with crimping sleeves specified for lightweight industrial hoses, provided the sleeve is designed for that hose type and matches the flange/hose dimensions. The product description for the SAE 3000 collar end (SFL), lightweight series explicitly states it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose; material and galvanization do not prevent compatibility. Ensure the sleeveâs diameter, wall thickness, and crimp profile match the hose and ZSK111 flange specifications, and follow manufacturer crimping force and tooling guidelines.

What crimping sleeve dimensions are recommended for SAE 3000 flange end, type ZSK111, light series, carbon steel?

For SAE 3000 flange end, type ZSK111, light series, carbon steel (designed like SAE 3000 collar end (SFL), lightweight series): use crimping sleeves sized to match the hose outer diameter and the flange collar dimensions of the light series. Recommended sleeve dimensions (typical guidance for lightweight SAE 3000 / SFL style fittings): - Sleeve material: carbon steel, compatible galvanization. - Sleeve length: approximately 1.2â1.6 Ã hose outer diameter (OD), ensuring full engagement of crimp over braid and cover. - Sleeve inner diameter (ID) before crimp: slightly larger than hose OD (clearance â 0.1â0.3 mm) to allow proper placement. - Final crimp (finished) diameter: matching the flange collar outside diameter for the light series. typically reducing sleeve ID by 20â30% from its original ID to form a secure, leak-free joint (follow crimper manufacturerâs die settings). - Wall thickness: sufficient to yield a solid crimp without splitting. commonly 1.5â3.0 mm depending on hose size and pressure class. - Crimp profile: uniform barrel crimp with straight, even collapse; avoid sharp wrinkles near the flange seat. - Die set: use dies specified for lightweight SAE 3000 sleeves and hose OD; adjust crimp force according to hose manufacturerâs charts. Important: these are general recommendations; final sleeve dimensions and die settings must be validated against the specific hose OD, braid construction and manufacturerâs crimping chart for SAE 3000 flange end, type ZSK111, light series, carbon steel to ensure proper fit and pressure rating.

SAE 3000 flange end, type ZSK111, light series, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

SAE 3000 collar end (SFL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZSK111-08-08	End fitting, coupling, SAE 1/2", hose 1/2", lightweight	12	-	In stock	Enquiry
TI-ZSK111-08-10	End. socket. SAE 1/2", hose 5/8", lightweight	16	-	In stock	Enquiry
TI-ZSK111-10-08K	End. collar. SAE 5/8", hose 1/2", light KOMATSU	12	-	In stock	Enquiry
TI-ZSK111-10-10K	End fitting SAE 5/8", hose 5/8", lightweight KOMATSU	16	-	In stock	Enquiry
TI-ZSK111-12-08	End. collar. SAE 3/4", hose 1/2", lightweight	12	-	In stock	Enquiry
TI-ZSK111-12-10	End. collar. SAE 3/4", hose 5/8", lightweight	16	-	In stock	Enquiry
TI-ZSK111-12-12	End fitting SAE 3/4", hose 3/4", lightweight	20	-	In stock	Enquiry
TI-ZSK111-16-12	End. col. SAE 1", hose 3/4", light	20	-	In stock	Enquiry
TI-ZSK111-16-16	End fitting, coupling, SAE 1", hose 1", lightweight	25	-	In stock	Enquiry
TI-ZSK111-20-16	End. col. SAE 1.1/4", hose 1", light	25	-	In stock	Enquiry
TI-ZSK111-20-20	End fitting SAE 1.1/4", hose 1.1/4", lightweight	32	-	In stock	Enquiry
TI-ZSK111-24-20	End fitting SAE 1.1/2", hose 1.1/4", lightweight	32	-	In stock	Enquiry
TI-ZSK111-24-24	End fitting SAE 1.1/2", hose 1.1/2", lightweight	38	-	In stock	Enquiry
TI-ZSK111-32-24	End. collar. SAE 2", hose 1.1/2", light	38	-	In stock	Enquiry
TI-ZSK111-32-32	End fitting SAE 2", hose 2", lightweight	50	-	In stock	Enquiry
TI-ZSK111-40-32	End. col. SAE 2.1/2", hose 2", light	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

SAE 3000 collar end (SFL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.