Is SILICAFLEX TAPE AB self-adhesive silica thermal tape suitable for protecting rubber hoses and pipes from radiant heat up to +982Â°C?

Yes. SILICAFLEX TAPE AB self-adhesive silica thermal tape is suitable for protecting rubber hoses and pipes from radiant heat up to +982Â°C. It is a silica fiber (silicon dioxide) thermal tape coated on one side with a bonding adhesive when stretched, specifically designed to protect hoses and pipes from intense radiant heat and flames. The tape thickness (~0.76 mm) and recommended 50% overlap during installation help create an effective insulating barrier. The stated continuous operating temperature is up to +982Â°C, with temporary exposure capability up to +1650Â°C, so for applications where temperatures do not exceed +982Â°C continuously, SILICAFLEX TAPE AB is appropriate. Ensure correct installation (50% overlap) and verify adhesive and substrate compatibility for long-term performance, especially on rubber that may degrade under prolonged high temperatures.

Can SILICAFLEX TAPE AB self-adhesive silica thermal tape be safely used on exhaust systems where temperatures occasionally reach +1650Â°C?

No. SILICAFLEX TAPE AB self-adhesive silica thermal tape is rated for continuous use up to +982Â°C and can tolerate short, temporary excursions up to +1650Â°C. Using it on exhaust systems that occasionally reach +1650Â°C risks damage, degradation of the adhesive, loss of mechanical integrity and reduced protective performance during and after those peaks. It may be acceptable only if the +1650Â°C events are extremely brief, infrequent, and the installation allows for adhesive failure without safety consequences. For repeated or prolonged exposures at or near +1650Â°C, choose a product specifically rated for sustained use at those temperatures or consult the manufacturer for an application-specific assessment.

Can SILICAFLEX TAPE AB self-adhesive silica thermal tape be used on flexible braided stainless steel lines?

Yes. SILICAFLEX TAPE AB self-adhesive silica thermal tape can be used on flexible braided stainless steel lines, with some important considerations. Why it works: - The tape is made of silica fiber and withstands very high temperatures (continuous up to +982Â°C, brief exposure to +1650Â°C), so it protects braided stainless lines from intense radiant heat and flames. - Its one-sided bonding adhesive and recommended 50% overlap allow it to conform and adhere around cylindrical, flexible hose and pipe surfaces. Installation tips: - Clean and dry the braided line thoroughly before applying to ensure good adhesion. - Stretch the tape slightly as you wrap and maintain the recommended 50% overlap to form a continuous thermal barrier and avoid gaps. - Secure the ends with high-temperature tape, stainless clamps, or high-temp adhesive if needed, especially on rounded or moving fittings. - Inspect periodically; adhesive performance can degrade under repeated flexing, vibration, or exposure to oils/chemicals. For highly dynamic assemblies consider supplemental mechanical fastening. Limitations: - Adhesive bond may weaken with constant flexing, oil contamination, or prolonged exposure to mechanical abrasion. In such cases add clamping or stainless wire ties. - Ensure clearance and compatibility with surrounding components and operating conditions (pressure, movement, chemical exposure). Summary: SILICAFLEX TAPE AB self-adhesive silica thermal tape is suitable for protecting flexible braided stainless steel lines from radiant heat and flames when applied with proper surface prep, 50% overlap, and additional mechanical securing if the line is subject to heavy movement or contamination.

SILICAFLEX TAPE AB self-adhesive silica thermal tape

All products, Covers/

Additional information

Maximum operating temperature [°C]	982
Standard length [m]	15

Thermal tape coated on one side with a bonding adhesive when stretched. Designed to protect hoses, hoses, and pipes from intense radiant heat and flames. The thickness of the tape is approximately 0.76 mm. A 50% overlap is recommended during installation. Material: silica fiber (silicon dioxide). Operating temperature: up to +982°C (temporarily up to +1650°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
FQ-STAB-02	SILICAFLEX tape 51 mm	-	-	In stock	Enquiry
FQ-STAB-03	SILICAFLEX tape 76 mm	-	-	In stock	Enquiry
FQ-STAB-04	SILICAFLEX tape 102 mm	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Thermal tape coated on one side with a bonding adhesive when stretched. Designed to protect hoses, hoses, and pipes from intense radiant heat and flames. The thickness of the tape is approximately 0.76 mm. A 50% overlap is recommended during installation. Material: silica fiber (silicon dioxide). Operating temperature: up to +982°C (temporarily up to +1650°C).