Can NON SKIVE AGO straight end, carbon steel, type NOZ110 be crimped on 4SP/4SH/R13/R15 hoses with TI-N sleeve without cutting hose rubber and still ensure reliable flat sealing?

Yes . the NON SKIVE AGO straight end, carbon steel, type NOZ110 can be crimped on 4SP/4SH/R13/R15 hoses with a TIâN sleeve without cutting the hose rubber and still provide reliable flat (AGO) sealing, provided correct assembly and equipment are used. Key points: - The fitting is specifically described as a Straight NON SKIVE end with external UNF thread and flat sealing (AGO) intended for crimping on 4SP, 4SH, R13, and R15 hoses using a TIâN crimping sleeve . this implies a nonâskive assembly procedure is supported. - When assembled without removing the hose cover (nonâskive), the TIâN sleeve is designed to compress both the hose reinforcement and the liner sufficiently to form mechanical retention and a reliable flat face seal with the AGO seating surface. - Reliability depends on following manufacturer torque/crimp specifications, using the correct TIâN sleeve size for the hose and NOZ110 fitting, and employing calibrated crimping equipment and dies matching the sleeve/hose combination. - Inspect assembled joints for correct crimp dimensions, complete sleeve swage, and proper alignment; perform pressure testing per applicable standards to confirm sealing integrity. Conclusion: Yes . when assembled per the specified nonâskive procedure with the correct TIâN sleeve, tooling, and quality checks, the NON SKIVE AGO straight end, carbon steel, type NOZ110 will provide reliable flat (AGO) sealing on 4SP/4SH/R13/R15 hoses without cutting the hose rubber.

Is NON SKIVE AGO straight end, carbon steel, type NOZ110 suitable for crimping on 4SP/4SH/R13/R15 hoses with TI-N sleeve while preserving hose integrity?

Yes. NON SKIVE AGO straight end, carbon steel, type NOZ110 is suitable for crimping on 4SP/4SH/R13/R15 hoses with a TI-N sleeve while preserving hose integrity. Its NON SKIVE design means the hose rubber is not cut or removed during assembly; the flat sealing (AGO) and external UNF thread provide a reliable seal and mechanical connection. Material (carbon steel, galvanized) is standard for crimped fittings and compatible with TI-N sleeves used on these hose types. Ensure correct sleeve size and crimping parameters for your hose spec and follow manufacturer crimping instructions to maintain hose integrity and meet pressure/safety requirements.

Can NON SKIVE AGO straight end, carbon steel, type NOZ110 be installed on 4SP/4SH/R13/R15 with TI-N sleeve without cutting hose rubber?

Yes. The NON SKIVE AGO straight end, carbon steel, type NOZ110 can be installed on 4SP/4SH/R13/R15 with a TI-N sleeve without cutting the hose rubber. The fitting is specifically a straight NON SKIVE end fitting with external UNF thread and flat sealing (AGO), engineered for crimping into hoses of types 4SP, 4SH, R13, and R15 using the provided TI-N crimping sleeve. Assembly is intended to be performed without removing or cutting the hose rubber, and the component material (carbon steel, galvanized) supports standard crimping procedures. Ensure correct sleeve size, crimping parameters, and tooling per manufacturer specifications for a proper, leak-free crimp.

NON SKIVE AGO straight end, carbon steel, type NOZ110

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Straight NON SKIVE end fitting with external UNF thread, featuring flat sealing (AGO), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve. Assembly: without cutting the hose rubber. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-NOZ110-19-12	End. ORFS NON SKIVE GZ 1.3/16", hose 3/4"	20	-	In stock	Enquiry
TI-NOZ110-23-16	End. ORFS NON SKIVE GZ 1.7/16", hose 1"	25	-	In stock	Enquiry
TI-NOZ110-27-20	End. ORFS NON SKIVE GZ 1.11/16", hose 1.1/4"	32	-	In stock	Enquiry
TI-NOZ110-32-24	End. ORFS NON SKIVE GZ 2", hose 1.1/2"	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Straight NON SKIVE end fitting with external UNF thread, featuring flat sealing (AGO), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve. Assembly: without cutting the hose rubber. Material: carbon steel, galvanized.