Is the 90Â° long angle plug connector with male thread, type R36 suitable for repeated disconnects without losing sealing on both mechanical and pneumatic sides?

Yes. The 90Â° long angle plug connector with male thread, type R36 is suitable for repeated disconnects without losing sealing on both mechanical and pneumatic sides. The product description explicitly states it is âeasy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides.â With NBR sealing, plastic construction, compatibility with vacuum and air, a working pressure up to 12 bar and an operating temperature range of â20Â°C to +60Â°C, it is designed to maintain both mechanical and pneumatic integrity through repeated connections and disconnections, provided it is used within these specified limits and handled per normal good-practice installation and maintenance.

Can the 90Â° long angle plug connector with male thread, type R36 be used with media other than vacuum and air without affecting sealing?

No - the 90Â° long angle plug connector with male thread, type R36 is specified for vacuum and air only. Its material (plastic) and NBR sealing are rated for those media within the given temperature range (â20Â°C to +60Â°C) and up to 12 bar. Using it with other gases or liquids may degrade the NBR seal or plastic body, cause chemical incompatibility, swelling, hardening or leakage, and thus compromise sealing and safety. For other media, consult the manufacturer for compatible materials or choose a connector rated for the specific fluid and conditions.

Does the 90Â° long angle plug connector with male thread, type R36 require special maintenance to preserve NBR sealing over time?

No, the 90Â° long angle plug connector with male thread, type R36 does not require special maintenance to preserve the NBR sealing under normal operating conditions. The product is designed for easy and quick use in multiple assemblies without loss of sealing on the mechanical and pneumatic sides. To ensure long service life and optimal sealing performance, follow basic good-practice measures: - Operate within specified limits: working pressure up to 12 bar, temperature range â20Â°C to +60Â°C, and use only recommended media (vacuum, air). - Avoid exposure to incompatible chemicals, oils, or aggressive fluids that can degrade NBR (strong oxidizers, certain solvents, ketones, and oils not compatible with NBR). - Prevent mechanical damage: avoid excessive bending, impact, or abrasion at the sealing area and threads. - Keep sealing surfaces and threads clean and free of debris before assembly to avoid wear and leaks. - Inspect periodically for visible wear, hardening, cracks or extrusion of the NBR seal; replace the connector if signs of deterioration appear. - Do not exceed recommended assembly torque or apply inappropriate tools that could deform the seal. Following these standard precautions will preserve the NBR sealing of the 90Â° long angle plug connector with male thread, type R36 without need for special maintenance.

90° long angle plug connector with male thread, type R36

All products, Push-in fittings/

Additional information

Material	P – material (plastic)

90° long angled plug connector with external thread, type R36, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2L36001	Adjustable long angled connector RL36 hose 4 mm, GZ M5, plastic	-	12	In stock	Enquiry
MW-2L36002	Adjustable long angled connector RL36 hose 4 mm, GZ BSP 1/8", plastic	-	12	In stock	Enquiry
MW-2L36006	Adjustable long angle connector RL36 hose 6 mm, GZ M5, plastic	-	12	In stock	Enquiry
MW-2L36007	Adjustable long angled connector RL36 hose 6 mm, GZ BSP 1/8", plastic	-	12	In stock	Enquiry
MW-2L36008	Long adjustable angle connector RL36 hose 6 mm, GZ BSP 1/4", plastic	-	12	In stock	Enquiry
MW-2L36009	Long adjustable angle connector RL36 hose 8 mm, GZ BSP 1/8", plastic	-	12	In stock	Enquiry
MW-2L36010	Long adjustable angle connector RL36 hose 8 mm, GZ BSP 1/4", plastic	-	12	In stock	Enquiry
MW-2L36012	Long adjustable angle connector RL36 hose 10 mm, GZ BSP 1/4", plastic	-	12	In stock	Enquiry
MW-2L36020	Adjustable long angled connector RL36 hose 4 mm, GZ M7, plastic	-	12	In stock	Enquiry
MW-2L36021	Adjustable long angle connector RL36 hose 6 mm, GZ M7, plastic	-	12	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° long angled plug connector with external thread, type R36, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.