Is the 90Â° INTERLOCK GW BSP angle end, carbon steel suitable for hose types 4SH, R13, and R15 with a 60Â° cone and O-ring?

Yes. The 90Â° INTERLOCK GW BSP angle end, carbon steel is suitable. The product description specifies an internal BSP thread, a 60Â° cone with O-ring, and compatibility with hose types 4SH, R13, and R15. Material construction in carbon steel (galvanized) matches common hydraulic applications for these hoses, and the 60Â° cone with O-ring provides the required sealing interface for those hose types.

Can the 90Â° INTERLOCK GW BSP angle end, carbon steel withstand pressure and temperature variations for 4SH, R13, and R15 hoses with a 60Â° cone and O-ring?

Yes. The 90Â° INTERLOCK GW BSP angle end, carbon steel (galvanized) is designed for use with 4SH, R13, and R15 hoses featuring a 60Â° cone and Oâring. Carbon steel construction with galvanization provides strength and corrosion resistance suitable for typical hydraulic systems. Performance under pressure and temperature depends on the hose and system ratings: if the operating pressure and temperature stay within the specified limits of the hoses (4SH/R13/R15) and the fittingâs BSP thread and seal are properly assembled with the 60Â° cone and Oâring, the 90Â° INTERLOCK GW BSP angle end will withstand normal pressure and temperature variations. Ensure compatibility by verifying the specific pressure and temperature ratings from manufacturer datasheets and using correct assembly torque and Oâring material for the application.

Can the 90Â° INTERLOCK GW BSP angle end, carbon steel be used with hydraulic fittings for 4SH, R13, and R15 hoses?

Yes. The 90Â° INTERLOCK GW BSP angle end, carbon steel is designed for use with hydraulic hoses 4SH, R13, and R15. It features an internal BSP thread and a 60Â° cone with O-ring sealing, which provides a reliable metal-to-elastomer seal suitable for high-pressure hydraulic applications typical of these hose types. The carbon steel, galvanized construction offers strength and corrosion resistance appropriate for hydraulic systems. Important considerations: - Ensure correct size and BSP thread match the mating port and hose ferrule/adapter dimensions. - Verify the hose assembly method and ferrule/interlock sleeve are compatible with the 90Â° INTERLOCK design to achieve proper crimping and sealing. - Confirm pressure ratings of the fitting, hose, and overall assembly align with your system operating pressures and safety factors. - Check fluid compatibility with the O-ring material and galvanized surface for your hydraulic fluid and operating environment. When these conditions are met, the 90Â° INTERLOCK GW BSP angle end, carbon steel can be used safely and effectively with 4SH, R13, and R15 hoses.

Fitting angled 90° INTERLOCK BSP female, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Fitting angled 90° INTERLOCK with BSP female thread, 60° cone with an O-ring, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ILBW210-12-12	Fitting 90° INTERLOCK 3/4" BSP female, hose 3/4", O-ring	20	-	In stock	Enquiry
TI-ILBW210-16-16	Fitting 90° INTERLOCK 1" BSP female, hose 1", O-ring	25	-	In stock	Enquiry
TI-ILBW210-20-20	Fitting 90° INTERLOCK 1.1/4" BSP female, hose 1.1/4", O-ring	32	-	In stock	Enquiry
TI-ILBW210-24-24	Fitting 90° INTERLOCK 1.1/2" BSP female, hose 1.1/2", O-ring	38	-	In stock	Enquiry
TI-ILBW210-32-32	Fitting 90° INTERLOCK 2" BSP female, hose 2", O-ring	50	-	In stock	Enquiry