Is the CAMLOCK E connector plug with corrugated hose end, brass compatible with hoses for up to 10 bar working pressure?

Yes. The CAMLOCK E connector plug with corrugated hose end, brass is compatible with hoses rated for up to 10 bar working pressure . the product specification explicitly states a working pressure of up to 10 bar, depending on connector size. Ensure you match the connector size to the hose and verify both components (hose, clamp/fitting installation) meet the required 10 bar rating for safe operation.

Can the CAMLOCK E connector plug with corrugated hose end, brass be used with petrochemical transfer systems requiring MIL-C-27487 compliance?

Yes. The CAMLOCK E connector plug with corrugated hose end, brass is manufactured to the American military standard MIL-C-27487 (A-A-59326) and is described as commonly used for transfer connections in the petrochemical industry. Both versions meet required parameters, come from reputable suppliers, and offer working pressure up to 10 bar (size-dependent). Therefore it can be used in petrochemical transfer systems requiring MIL-C-27487 compliance, provided the specific size and pressure rating match the systemâs operational requirements and any additional site-specific certifications or compatibility checks (e.g., temperature, fluid compatibility, fittings) are confirmed.

Does the CAMLOCK E connector plug with corrugated hose end, brass require special sealing for fuels?

No, the CAMLOCK E connector plug with corrugated hose end, brass does not typically require a special chemical sealant for fuels when installed correctly. Key points: - Design and material: The part is made of brass and built to MIL-C-27487 (A-A-59326) standards for transfer connections, commonly used in petrochemical applications, so itâs intended for fuel handling. - Sealing method: Sealing is normally achieved by the hose barb (corrugated/ribbed hose end) combined with a suitable hose, hose clamp or crimped ferrule. A proper fuel-grade hose sized to the hose tail and a correctly rated clamp/crimp provide the necessary leak-tight joint. - When to consider additional sealing: Use of thread sealants, tapes, or liquid sealers may be needed only if you connect threaded fittings elsewhere in the assembly, or if the hose/clamp method cannot ensure a reliable seal (damaged hose, mismatched sizes, high vibration). For fuels, select fuel-compatible clamps, crimp sleeves, and fuel-resistant hoses. - Pressure and safety: Working pressure up to 10 bar (depending on size) means fittings, hose and clamps must be rated accordingly. For high-pressure, vapor-tight, or long-term installations, prefer crimped ferrules or specially designed couplings rather than simple screw clamps. - Best practice: Use a fuel-rated hose of correct ID, a compatible clamp or crimp sleeve specified by the hose manufacturer, inspect for proper assembly, and follow supplier/manufacturer recommendations and applicable regulations. In summary, the CAMLOCK E connector plug with corrugated hose end, brass does not inherently need special sealing chemicals for fuels; reliable sealing is achieved by correct hose selection and an appropriate clamp or crimping method.

Plug coupling CAMLOCK E with a serrated hose fitting, brass

Additional information

Material	B – brass (bronze)

Plug coupling CAMLOCK E with a serrated hose fitting made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. both versions meet all required parameters and come from od reputable suppliers. Working pressure: up to 10 bar, depending on the coupling size. Material: brass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-E-050-B	Coupling CAMLOCK E 1/2" brass	12	9	In stock	Enquiry
AC-E-050-BX	Coupling CAMLOCK E 1/2", brass	12	9	In stock	Enquiry
AC-E-075-B	Coupling CAMLOCK E 3/4" brass	20	10	In stock	Enquiry
AC-E-075-BX	Coupling CAMLOCK E 3/4", brass	20	10	In stock	Enquiry
AC-E-100-B	Coupling CAMLOCK E 1" brass	25	10	In stock	Enquiry
AC-E-100-BX	Coupling CAMLOCK E 1", brass	25	10	In stock	Enquiry
AC-E-125-B	Coupling CAMLOCK E 1.1/4" brass	32	10	In stock	Enquiry
AC-E-125-BX	Coupling CAMLOCK E 1.1/4", brass	32	10	In stock	Enquiry
AC-E-150-B	Coupling CAMLOCK E 1.1/2" brass	40	10	In stock	Enquiry
AC-E-150-BX	Coupling CAMLOCK E 1.1/2", brass	40	10	In stock	Enquiry
AC-E-200-B	Coupling CAMLOCK E 2" brass	50	10	In stock	Enquiry
AC-E-200-BX	Coupling CAMLOCK E 2", brass	50	10	In stock	Enquiry
AC-E-250-B	Coupling CAMLOCK E 2.1/2" brass	65	10	In stock	Enquiry
AC-E-250-BX	Coupling CAMLOCK E 2.1/2", brass	65	10	In stock	Enquiry
AC-E-300-B	Coupling CAMLOCK E 3" brass	75	10	In stock	Enquiry
AC-E-300-BX	Coupling CAMLOCK E 3", brass	75	10	In stock	Enquiry
AC-E-400-B	Coupling CAMLOCK E 4" brass	100	10	In stock	Enquiry
AC-E-400-BX	Coupling CAMLOCK E 4", brass	100	10	In stock	Enquiry
AC-E-500-B	Coupling CAMLOCK E 5" brass	125	5	In stock	Enquiry
AC-E-500-BX	Coupling CAMLOCK E 5", brass	125	5	In stock	Enquiry
AC-E-600-B	Coupling CAMLOCK E 6" brass	150	5	In stock	Enquiry
AC-E-600-BX	Coupling CAMLOCK E 6", brass	150	5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug coupling CAMLOCK E with a serrated hose fitting made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. both versions meet all required parameters and come from od reputable suppliers. Working pressure: up to 10 bar, depending on the coupling size. Material: brass.