Is the CAMLOCK D connector socket with female thread, aluminum compatible with both BSP and NPT threaded hoses and fittings?

The CAMLOCK D connector socket with female thread, aluminum is manufactured with an internal BSP or NPT thread per the American military standard MIL-C-27487 (A-A-59326). That means individual units are made either with BSP or with NPT internal threads . they are not a single hybrid thread. Therefore: - A CAMLOCK D connector socket with female BSP thread will correctly mate with male BSP-threaded hoses/fittings. - A CAMLOCK D connector socket with female NPT thread will correctly mate with male NPT-threaded hoses/fittings. - BSP and NPT threads are not directly compatible/interchangeable due to different thread form and pitch; mixing them can cause poor sealing, mechanical damage and leaks. For reliable, leak-free connections, verify whether the specific CAMLOCK D connector socket with female thread, aluminum you order is BSP or NPT and match it to the corresponding male-threaded hose or fitting.

Can the CAMLOCK D connector socket with female thread, aluminum withstand exposure to petrochemical fluids at temperatures above 80Â°C?

CAMLOCK D connector socket with female thread, aluminum Format is not suitable for prolonged exposure to petrochemical fluids above 80Â°C. Reason: the body is aluminum (acceptable for many fluids but sensitive to some petrochemicals at elevated temperatures), levers are AISI 304 steel or brass (size-dependent) and the seal is NBR (Nitrile), which typically degrades above ~80Â°C and loses chemical resistance. Working pressure (up to 10 bar) does not mitigate seal and material temperature limits. For reliable service above 80Â°C, choose connectors with high-temperature-compatible seals (e.g., FKM/Viton or EPDM as appropriate) and verify alloy compatibility with specific petrochemical fluids.

Does the CAMLOCK D connector socket with female thread, aluminum require specific maintenance to preserve NBR seals under petrochemical exposure?

Yes. CAMLOCK D connector socket with female thread, aluminum requires specific maintenance to preserve NBR seals under petrochemical exposure. Key recommendations: - Inspect seals regularly: check NBR gaskets for swelling, hardening, cracking, or softening before each use and during routine maintenance intervals. - Clean with compatible agents: remove residues with mild soap and water or approved solvent cleaners safe for NBR; avoid strong ketones, chlorinated solvents, aromatic hydrocarbons, and concentrated acids/alkalis that accelerate NBR degradation. - Rinse and dry: after cleaning or exposure to chemicals, thoroughly rinse with water and dry to prevent trapped contaminants. - Use protective barriers when needed: consider using compatible barrier fluids or grease recommended for NBR in petrochemical service to reduce direct chemical attack. - Limit exposure time and concentration: avoid prolonged contact with aggressive hydrocarbons, aromatics, or oils known to swell NBR; if unavoidable, increase inspection and replacement frequency. - Store properly: keep spare NBR seals in cool, dark, dry conditions away from ozone, sunlight, and solvents; use original packaging when possible. - Replace proactively: replace seals at first signs of deterioration or at defined preventive intervals based on service severity. - Verify compatibility: consult chemical compatibility data for NBR with specific hydrocarbons, solvents, and process fluids used on site; when in doubt, test seals under real conditions or consider alternative seal materials (e.g., FKM) if compatibility is inadequate. - Maintain hardware: ensure aluminum body and AISI 304/brass levers are kept clean and free of corrosive deposits to prevent mechanical damage to seals and ensure proper coupling. Following these steps will extend NBR seal life and maintain safe performance of the CAMLOCK D connector socket with female thread, aluminum in petrochemical environments.

Socket coupling CAMLOCK D with a thread internal, aluminum

Additional information

Material	AL – aluminum

Socket coupling CAMLOCK D with a thread internal BSP or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum. Levers: steel AISI 304 (in sizes 1.1/4″ for 4″ – Levers made of brass). Sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-D-050-A	Coupling CAMLOCK D 1/2" aluminum	-	9	In stock	Enquiry
AC-D-050-AX	Coupling CAMLOCK D 1/2", aluminum	-	9	In stock	Enquiry
AC-D-075-A	Coupling CAMLOCK D 3/4" aluminum	-	10	In stock	Enquiry
AC-D-075-AX	Coupling CAMLOCK D 3/4" aluminum	-	10	In stock	Enquiry
AC-D-100-A	Coupling CAMLOCK D 1" aluminum	-	10	In stock	Enquiry
AC-D-100-A-NPT	Coupling CAMLOCK D 1" NPT, aluminum	-	10	In stock	Enquiry
AC-D-100-AX	Coupling CAMLOCK D 1" aluminum	-	10	In stock	Enquiry
AC-D-100-AX-NPT	Coupling CAMLOCK D 1" NPT, aluminum	-	10	In stock	Enquiry
AC-D-125-A	Coupling CAMLOCK D 1.1/4" aluminum	-	10	In stock	Enquiry
AC-D-125-AX	Coupling CAMLOCK D 1.1/4" aluminum	-	10	In stock	Enquiry
AC-D-150-A	Coupling CAMLOCK D 1.1/2" aluminum	-	10	In stock	Enquiry
AC-D-150-AX	Coupling CAMLOCK D 1.1/2" aluminum	-	10	In stock	Enquiry
AC-D-200-A	Coupling CAMLOCK D 2" aluminum	-	10	In stock	Enquiry
AC-D-200-AX	Coupling CAMLOCK D 2" aluminum	-	10	In stock	Enquiry
AC-D-250-A	Coupling CAMLOCK D 2.1/2" aluminum	-	10	In stock	Enquiry
AC-D-250-AX	Coupling CAMLOCK D 2.1/2" aluminum	-	10	In stock	Enquiry
AC-D-300-A	Coupling CAMLOCK D 3" aluminum	-	10	In stock	Enquiry
AC-D-300-AX	Coupling CAMLOCK D 3" aluminum	-	10	In stock	Enquiry
AC-D-400-A	Coupling CAMLOCK D 4" aluminum	-	10	In stock	Enquiry
AC-D-400-AX	Coupling CAMLOCK D 4" aluminum	-	10	In stock	Enquiry
AC-D-500-A	Coupling CAMLOCK D 5" aluminum	-	5	In stock	Enquiry
AC-D-500-AX	Coupling CAMLOCK D 5", aluminum	-	5	In stock	Enquiry
AC-D-600-A	Coupling CAMLOCK D 6" aluminum	-	5	In stock	Enquiry
AC-D-600-AX	Coupling CAMLOCK D 6", aluminum	-	5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Socket coupling CAMLOCK D with a thread internal BSP or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum. Levers: steel AISI 304 (in sizes 1.1/4″ for 4″ – Levers made of brass). Sealing: NBR.