Is the CAMLOCK A connector plug with female thread, polypropylene suitable for petrochemical transfer at pressures up to 7 bar and which sizes support this rating?

Yes. The CAMLOCK A connector plug with female thread, polypropylene Format is suitable for petrochemical transfer at pressures up to 7 bar, provided you select an appropriate size. The product description states a working pressure of up to 7 bar depending on connector size; material is fiberglassâreinforced polypropylene, commonly used for petrochemical transfer and manufactured to MILâCâ27487 (AâAâ59326) standards. To ensure safe operation at 7 bar, confirm the specific sizeâs rated working pressure with the manufacturer or technical datasheet, since smaller or larger sizes may have lower allowable pressures.

Can CAMLOCK A connector plug with female thread, polypropylene withstand chemical exposure common in petrochemical transfer at up to 7 bar?

Yes. A CAMLOCK A connector plug with female thread, polypropylene (glass-fibre reinforced) made to MIL-C-27487 (A-A-59326) is commonly specified for petrochemical transfer and is rated for working pressures up to 7 bar (depending on size). The glass-fibre-reinforced polypropylene offers good chemical resistance to many hydrocarbons and typical petrochemical fluids, so it can withstand chemical exposure in such applications within the stated pressure and temperature limits. Verify compatibility with the specific fluids, concentrations and operating temperature range, and confirm the connector size and pressure rating for your exact use.

Does the CAMLOCK A connector plug with female thread, polypropylene meet MIL-C-27487 requirements for petrochemical transfer?

Yes. The CAMLOCK A connector plug with female thread, polypropylene Format is manufactured to the American military specification MIL-C-27487 (A-A-59326), which explicitly governs camlock (cam and groove) couplings commonly used for transfer services in the petrochemical industry. Its designation and stated compliance indicate it was produced to the dimensional, material and performance requirements of that standard. Key points supporting suitability: - Standard compliance: It is made according to MIL-C-27487 (A-A-59326), the referenced military specification for cam and groove couplings used in fuel and chemical transfer applications. - Intended application: The product description notes common use as a transfer connection, particularly in the petrochemical industry, aligning with the standardâs intended scope. - Pressure rating: Working pressure up to 7 bar (depending on size) is within typical service conditions for many petrochemical transfer tasks; check your systemâs maximum operating pressure and applicable safety margins against this rating. - Material: Polypropylene reinforced with fiberglass offers chemical resistance and strength suitable for many petrochemical fluids; however, chemical compatibility must be confirmed for the specific liquids and temperatures handled. Caveats and recommended checks: - Confirm size-specific pressure rating and any certification/test reports from the manufacturer showing compliance with MIL-C-27487. - Verify chemical compatibility of fiberglass-reinforced polypropylene with the specific petrochemical products, concentrations and temperatures in your application. - Ensure mating components (couplers, gaskets) and installation conform to the same standard and are rated for your systemâs pressure and temperature, and review any industry or local regulatory requirements beyond MIL-C-27487. Conclusion: On the basis of the description, the CAMLOCK A connector plug with female thread, polypropylene Format meets MIL-C-27487 requirements and is intended for petrochemical transfer, provided you verify size-specific pressure ratings, chemical compatibility and supporting manufacturer certification for your exact use case.

CAMLOCK A connector plug with female thread, polypropylene

Additional information

Material	P – material (plastic)

CAMLOCK A connector plug with internal BSP thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: polypropylene reinforced with fiberglass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-A-050-P	CAMLOCK A 3/4" connector, G 1/2", polypropylene	-	7	In stock	Enquiry
AC-A-075-P	CAMLOCK A 3/4" connector, polypropylene	-	7	In stock	Enquiry
AC-A-075-PX	CAMLOCK A 3/4" connector, polypropylene	-	7	In stock	Enquiry
AC-A-100-P	CAMLOCK A 1" connector, polypropylene	-	7	In stock	Enquiry
AC-A-100-PX	CAMLOCK A 1" connector, polypropylene	-	7	In stock	Enquiry
AC-A-125-P	CAMLOCK A 1" connector, G1.1/4" polypropylene	-	7	In stock	Enquiry
AC-A-150-P	CAMLOCK A 1.1/2" polypropylene connector	-	7	In stock	Enquiry
AC-A-150-PX	CAMLOCK A 1.1/2" polypropylene connector	-	7	In stock	Enquiry
AC-A-200-P	CAMLOCK A 2" polypropylene connector	-	7	In stock	Enquiry
AC-A-200-PX	CAMLOCK A 2" polypropylene connector	-	7	In stock	Enquiry
AC-A-300-P	CAMLOCK A 3" polypropylene connector	-	4	In stock	Enquiry
AC-A-300-PX	CAMLOCK A 3" polypropylene connector	-	4	In stock	Enquiry
AC-A-400-P	CAMLOCK A 4" polypropylene connector	-	4	In stock	Enquiry
AC-A-400-PX	CAMLOCK A 4" connector, polypropylene	-	4	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

CAMLOCK A connector plug with internal BSP thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: polypropylene reinforced with fiberglass.