Is the CAMLOCK D connector socket with female thread, brass compatible with NPT and BSP piping threads and interchangeable with MIL-C-27487 (A-A-59326) fittings?

Yes. The CAMLOCK D connector socket with female thread, brass described is manufactured to the American military standard MIL-C-27487 (A-A-59326) and is offered with internal BSP or NPT threads, so it is compatible with piping that uses those respective thread forms when the matching thread type (BSP or NPT) is selected. Because it is made according to MIL-C-27487 (A-A-59326), it is also intended to be interchangeable with fittings conforming to that same military specification, provided mating parts are the correct size and thread type and seals are properly used. Note: ensure you match the connectorâs specific internal thread type (BSP vs NPT) and size to the mating fitting and verify pressure, material and seal compatibility (working pressure up to ~10 bar, brass body, AISI 304 levers, NBR seal).

Can CAMLOCK D connector socket with female thread, brass be used in petrochemical transfer systems at up to 10 bar pressure?

Yes. CAMLOCK D connector socket with female thread, brass Format can be used in petrochemical transfer systems at up to 10 bar, provided the specific connector size is rated for that working pressure. It is manufactured to MIL-C-27487 (A-A-59326), commonly used for petrochemical transfers, made of brass with AISI 304 levers and NBR sealing. Ensure the chosen sizeâs pressure rating, compatibility of brass and NBR with the media and temperature, and compliance with local safety and installation standards before use.

Can CAMLOCK D connector socket with female thread, brass be used with hoses carrying petroleum products?

Yes. CAMLOCK D connector socket with female thread, brass can be used with hoses carrying petroleum products, with these important caveats: - Intended application: The product is commonly used as a transfer connection in the petrochemical industry and is made to the MIL-C-27487 (A-A-59326) standard, which supports fuel/oil transfer use-cases. - Material compatibility: The body is brass, levers are AISI 304 stainless steel, and the seal is NBR (nitrile rubber). Brass and AISI 304 are generally compatible with petroleum products. NBR is widely used for seals in fuel/oil applications and has good resistance to hydrocarbons, mineral oils and fuels. - Pressure rating: Working pressure is up to 10 bar depending on connector size. ensure this meets the systemâs maximum operating pressure plus safety margin. - Temperature and chemical limits: NBR has limited high-temperature and certain chemical tolerances (e.g., resistance decreases with aromatic or oxygenated fuels, high temperatures, or prolonged exposure). Verify the specific petroleum product (diesel, gasoline, biofuel blends, solvents, etc.) and operating temperature to confirm NBR suitability. - Safety and regulatory: Confirm compatibility with local regulations and industry standards for fuel handling, and ensure connectors, hoses and fittings are properly certified for the specific fluid and system. - Installation and inspection: Use correct thread type (BSP or NPT) to match the hose/fitting, tighten per spec, and routinely inspect seals and levers for wear or degradation. Conclusion: In most conventional petroleum transfer applications (diesel, mineral oils) CAMLOCK D connector socket with female thread, brass is suitable, provided the system pressure, temperature and the specific fuel composition do not exceed the material and seal limits. For gasoline, oxygenates, biofuels or high-temperature service, verify NBR compatibility or consider alternative seal materials (e.g., FKM) if required.

CAMLOCK D connector socket with female thread, brass

Additional information

Material	B – brass (bronze)

CAMLOCK D connector socket with internal BSP or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass. Levers: AISI 304 steel. Sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-D-050-B	CAMLOCK connector D 1/2" brass	-	9	In stock	Enquiry
AC-D-050-BX	CAMLOCK connector D 1/2", brass	-	9	In stock	Enquiry
AC-D-075-B	CAMLOCK connector D 3/4" brass	-	10	In stock	Enquiry
AC-D-075-BX	CAMLOCK connector D 3/4", brass	-	10	In stock	Enquiry
AC-D-100-B	CAMLOCK connector D 1" brass	-	10	In stock	Enquiry
AC-D-100-BX	CAMLOCK connector D 1", brass	-	10	In stock	Enquiry
AC-D-125-B	CAMLOCK connector D 1.1/4" brass	-	10	In stock	Enquiry
AC-D-125-BX	CAMLOCK connector D 1.1/4", brass	-	10	In stock	Enquiry
AC-D-150-B	CAMLOCK connector D 1.1/2" brass	-	10	In stock	Enquiry
AC-D-150-B-NPT	CAMLOCK connector D 1.1/2" NPT brass	-	10	In stock	Enquiry
AC-D-150-BX	CAMLOCK connector D 1.1/2", brass	-	10	In stock	Enquiry
AC-D-150-BX-NPT	CAMLOCK connector D 1.1/2" NPT, brass	-	10	In stock	Enquiry
AC-D-200-B	CAMLOCK connector D 2" brass	-	10	In stock	Enquiry
AC-D-200-B-NPT	CAMLOCK connector D 2" NPT brass	-	10	In stock	Enquiry
AC-D-200-BX	CAMLOCK connector D 2", brass	-	10	In stock	Enquiry
AC-D-200-BX-NPT	CAMLOCK connector D 2" NPT, brass	-	10	In stock	Enquiry
AC-D-250-B	CAMLOCK connector D 2.1/2" brass	-	10	In stock	Enquiry
AC-D-250-BX	CAMLOCK connector D 2.1/2", brass	-	10	In stock	Enquiry
AC-D-300-B	CAMLOCK connector D 3" brass	-	10	In stock	Enquiry
AC-D-300-BX	CAMLOCK connector D 3", brass	-	10	In stock	Enquiry
AC-D-400-B	CAMLOCK connector D 4" brass	-	10	In stock	Enquiry
AC-D-400-BX	CAMLOCK connector D 4", brass	-	10	In stock	Enquiry
AC-D-500-B	CAMLOCK connector D 5" brass	-	5	In stock	Enquiry
AC-D-500-BX	CAMLOCK connector D 5", brass	-	5	In stock	Enquiry
AC-D-600-B	CAMLOCK connector D 6" brass	-	5	In stock	Enquiry
AC-D-600-BX	CAMLOCK connector D 6", brass	-	5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

CAMLOCK D connector socket with internal BSP or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass. Levers: AISI 304 steel. Sealing: NBR.