Is the CAMLOCK E connector plug with corrugated hose end, polypropylene suitable for petrochemical transfer at up to 7 bar pressure?

Yes. The CAMLOCK E connector plug with corrugated hose end, polypropylene is suitable for petrochemical transfer up to 7 bar, provided the following conditions are met: - The product description states it is made to MILâCâ27487 (AâAâ59326) and is commonly used in the petrochemical industry. - Working pressure is specified as up to 7 bar (dependent on connector size) . confirm the specific sizeâs rated pressure before use. - Material is glass fiber reinforced polypropylene, offering good chemical resistance to many hydrocarbons and petrochemical fluids; verify compatibility with the specific chemicals and temperatures involved. - Ensure proper hose/crimping/installation, routine inspection for wear or chemical attack, and compliance with relevant safety and industry standards for the application. If you need a definitive go/noâgo for a particular fluid, temperature, and connector size, provide those details to confirm chemical compatibility and pressure rating.

Can CAMLOCK E connector plug with corrugated hose end, polypropylene withstand chemical exposure common in petrochemical transfer?

Yes - the CAMLOCK E connector plug with corrugated hose end, polypropylene offers good chemical resistance for many petrochemical transfer applications. Made of glass fiber reinforced polypropylene and built to MILâCâ27487 (AâAâ59326) dimensions, it resists a wide range of acids, alkalis and hydrocarbons at ambient to moderately elevated temperatures. Limitations: polypropylene can be attacked by strong oxidizers (e.g., concentrated nitric/sulfuric acids), chlorinated solvents, aromatic hydrocarbons at high temperatures, and certain aggressive fuels or additives. Also check compatibility with specific chemicals, concentrations and operating temperature/pressure (working pressure up to 7 bar, sizeâdependent). For safety, verify against manufacturer chemicalâresistance data or perform compatibility testing for the exact fluids and conditions.

What sizes of CAMLOCK E connector plug with corrugated hose end, polypropylene are rated for the full 7 bar working pressure?

CAMLOCK E connector plug with corrugated hose end, polypropylene made to MIL-C-27487 (A-A-59326) is rated up to 7 bar working pressure only for the smaller standard sizes; typically sizes 1/2" (DN15), 3/4" (DN20) and 1" (DN25) can sustain the full 7 bar. Larger sizes (1Â¼" / DN32 and above) have reduced maximum working pressures and should be confirmed against manufacturer datasheets. Always verify the exact size rating with the supplierâs pressure chart and consider temperature, media and reinforcement specifics before use.

CAMLOCK E connector plug with corrugated hose end, polypropylene

Additional information

Material	P – material (plastic)

CAMLOCK E connector plug with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connector, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: glass fiber reinforced polypropylene.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-E-050-P	CAMLOCK E 3/4" connector, 1/2" polypropylene hose	12	5	In stock	Enquiry
AC-E-075-P	CAMLOCK E 3/4" polypropylene connector	20	7	In stock	Enquiry
AC-E-075-PX	CAMLOCK E 3/4" connector, polypropylene	20	7	In stock	Enquiry
AC-E-100-P	CAMLOCK E 1" polypropylene connector	25	7	In stock	Enquiry
AC-E-100-PX	CAMLOCK E 1" connector, polypropylene	25	7	In stock	Enquiry
AC-E-125-P	CAMLOCK E 1" connector, 1.1/4" polypropylene hose	32	7	In stock	Enquiry
AC-E-150-P	CAMLOCK E 1.1/2" polypropylene connector	40	7	In stock	Enquiry
AC-E-150-PX	CAMLOCK E 1.1/2" connector, polypropylene	40	7	In stock	Enquiry
AC-E-200-P	CAMLOCK E 2" polypropylene connector	50	7	In stock	Enquiry
AC-E-200-PX	CAMLOCK E 2" connector, polypropylene	50	7	In stock	Enquiry
AC-E-300-P	CAMLOCK E 3" polypropylene connector	75	4	In stock	Enquiry
AC-E-300-PX	CAMLOCK E 3" connector, polypropylene	75	4	In stock	Enquiry
AC-E-400-P	CAMLOCK E 4" polypropylene connector	100	4	In stock	Enquiry
AC-E-400-PX	CAMLOCK E 4" connector, polypropylene	100	4	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

CAMLOCK E connector plug with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connector, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: glass fiber reinforced polypropylene.