Is the Walterscheidâ¢ W angle fitting, carbon steel, compatible with standard 24Â° DIN 2353 hoses and fittings across LL, L, and S series?

Yes. The Walterscheidâ¢ W angle fitting, carbon steel is compatible with standard 24Â° DIN 2353 hoses and fittings across the LL, L and S series. It is a 24Â° DIN 2353 socket with external metric thread on both sides and is offered specifically for LL (very light), L (light) and S (heavy) series, making it suitable for use with corresponding DIN 2353 components. The carbon steel construction with Guardian Sealâ¢ galvanic coating provides the typical mechanical strength and corrosion protection expected for DIN 2353 connections.

Does the Walterscheidâ¢ W angle fitting, carbon steel, require specific torque values for assembly across LL, L, and S series?

No, the Walterscheidâ¢ W angle fitting, carbon steel does not have a single universal assembly torque across LL, L and S series specified in the provided DIN 2353 Eaton description. Torque requirements depend on series (LL, L, S), thread size and installation conditions. For safe and leak-free assembly you must follow the DIN 2353/Eaton/Walterscheid installation and torque tables for the specific series and thread size or consult the manufacturerâs technical documentation.

Can the Walterscheidâ¢ W angle fitting, carbon steel, with Guardian Sealâ¢ coating be used in corrosive environments?

Yes. the Walterscheidâ¢ W angle fitting, carbon steel, with Guardian Sealâ¢ coating can be used in moderately corrosive environments, but with limitations. Guardian Sealâ¢ is an electroplated (galvanic) coating applied to the carbon steel fitting to improve corrosion resistance compared with bare steel. For many industrial settings (occasional moisture, light chemicals, ambient outdoor exposure with limited salt or aggressive contaminants), the coated Walterscheidâ¢ W angle fitting, carbon steel will provide adequate protection and extended service life. However, electroplated coatings have finite durability and are not equivalent to stainless steel or heavy-duty protective systems. In highly corrosive conditions. continuous saltwater exposure, marine environments, strong acids or alkalis, long-term outdoor exposure without maintenance, or where mechanical wear damages the coating. the Guardian Sealâ¢ coating may degrade, risking corrosion of the underlying carbon steel and potential failure. Recommendations: - For mild to moderate corrosive environments, the coated Walterscheidâ¢ W angle fitting, carbon steel is suitable. - For severe or continuous corrosive exposure, specify a more corrosion-resistant material (e.g., stainless steel) or additional protective measures (paints, seals, sacrificial anodes) and consult Eaton/Walterscheid technical data for compatibility and expected lifetime. - Consider regular inspection and maintenance where corrosion risk exists.

Fitting angled Walterscheid™ W, carbon steel

Additional information

Material	CS – steel (cast iron)

Fitting DIN 2353 Eaton Walterscheid™ angled, type W: 24° DIN 2353 socket on both sides with metric male thread. Available as: LL (extra-light series), L (series light), S (series heavy). Material: carbon steel, with galvanic coating Guardian Seal™.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HD-W-04LL-W	Fitting Walterscheid DIN 2353 W 4LL	-	100	In stock	Enquiry
HD-W-06L-W	Fitting Walterscheid DIN 2353 W 6L	-	500	In stock	Enquiry
HD-W-06LL-W	Fitting Walterscheid DIN 2353 W 6LL	-	100	In stock	Enquiry
HD-W-06S-W	Fitting Walterscheid DIN 2353 W 6S	-	800	In stock	Enquiry
HD-W-08L-W	Fitting Walterscheid DIN 2353 W 8L	-	500	In stock	Enquiry
HD-W-08LL-W	Fitting Walterscheid DIN 2353 W 8LL	-	100	In stock	Enquiry
HD-W-08S-W	Fitting Walterscheid DIN 2353 W 8S	-	800	In stock	Enquiry
HD-W-10L-W	Fitting Walterscheid DIN 2353 W 10L	-	500	In stock	Enquiry
HD-W-10S-W	Fitting Walterscheid DIN 2353 W 10S	-	800	In stock	Enquiry
HD-W-12L-W	Fitting Walterscheid DIN 2353 W 12L	-	400	In stock	Enquiry
HD-W-12S-W	Fitting Walterscheid DIN 2353 W 12S	-	630	In stock	Enquiry
HD-W-15L-W	Fitting Walterscheid DIN 2353 W 15L	-	400	In stock	Enquiry
HD-W-16S-W	Fitting Walterscheid DIN 2353 W 16S	-	630	In stock	Enquiry
HD-W-18L-W	Fitting Walterscheid DIN 2353 W 18L	-	400	In stock	Enquiry
HD-W-20S-W	Fitting Walterscheid DIN 2353 W 20S	-	420	In stock	Enquiry
HD-W-22L-W	Fitting Walterscheid DIN 2353 W 22L	-	250	In stock	Enquiry
HD-W-25S-W	Fitting Walterscheid DIN 2353 W 25S	-	420	In stock	Enquiry
HD-W-28L-W	Fitting Walterscheid DIN 2353 W 28L	-	250	In stock	Enquiry
HD-W-30S-W	Fitting Walterscheid DIN 2353 W 30S	-	420	In stock	Enquiry
HD-W-35L-W	Fitting Walterscheid DIN 2353 W 35L	-	250	In stock	Enquiry
HD-W-38S-W	Fitting Walterscheid DIN 2353 W 38S	-	400	In stock	Enquiry
HD-W-42L-W	Fitting Walterscheid DIN 2353 W 42L	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Fitting DIN 2353 Eaton Walterscheid™ angled, type W: 24° DIN 2353 socket on both sides with metric male thread. Available as: LL (extra-light series), L (series light), S (series heavy). Material: carbon steel, with galvanic coating Guardian Seal™.