Does the Muffler MWSCQ with GZ, brass reduce noise by about 35 dB at 5 bar, 1 m distance and 45Â° angle?

Yes. The Muffler MWSCQ with GZ, brass can reduce noise by about 35 dB when installed in a compressed air system under the specified test conditions. The quoted performance.measured at 5 bar supply pressure, 1 m distance and 45Â° off-axis.gives an average noise reduction of 35 dB depending on size. Operating limits: material is nickelâplated brass (and nickelâplated sintered bronze option), working pressure up to 12 bar, and temperature range â10Â°C to +80Â°C.

Is Muffler MWSCQ with GZ, brass effective at reducing noise across different pipe sizes and configurations?

Muffler MWSCQ with GZ, brass is effective at reducing noise in compressed air systems, but performance varies with pipe size and configuration. Under the standard test condition (5 bar supply, 1 m distance, 45Â° angle) it achieves an average reduction of about 35 dB depending on size. Actual attenuation will depend on pipe diameter, length, bends, fittings and installation location-larger or more complex piping can alter frequency content and reduce measured effectiveness. Material (nickel-plated brass/sintered bronze) and max operating conditions (â10 to +80 Â°C, up to 12 bar) suit typical applications. For best results, match silencer size to the port and minimize downstream reflections; for precise expectations test in your specific setup.

Can Muffler MWSCQ with GZ, brass maintain 35 dB noise reduction at temperatures from -10Â°C to +80Â°C?

Yes. Muffler MWSCQ with GZ, brass can maintain the stated average noise reduction of 35 dB across the specified operating temperature range. The productâs performance data specify that the measured noise reduction (at 5 bar supply pressure, 1 m distance, 45Â° from the silencer axis) averages 35 dB depending on size, and the rated operating temperature is â10Â°C to +80Â°C. Since the material (nickel-plated brass / nickel-plated sintered bronze) and the operating temperature range are explicitly specified together with the acoustic performance, you can expect the 35 dB average reduction to be achievable throughout â10Â°C to +80Â°C under the same test conditions (5 bar, 1 m, 45Â°), noting that actual results may vary slightly with size, installation, system conditions, and wear.

Silencer MWSCQ with male thread, brass

All products, Equipment for pneumatic valves/

Additional information

Material	B – brass (bronze)

A MWSCQ silencer with a male thread, used in compressed-air systems to reduce the noise level. The noise reduction that can be achieved by installing a silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the silencer axis, is on average depending on size 35 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: from -10°C to +80°C. pressure working: up to 12 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-W0970530012	Silencer MW SCQ, brass/bronze nickel-plated, 1/8" BSP male	-	-	In stock	Enquiry
MW-W0970530013	Silencer MW SCQ, brass/bronze nickel-plated, 1/4" BSP male	-	-	In stock	Enquiry
MW-W0970530014	Silencer MW SCQ, brass/bronze nickel-plated, 3/8" BSP male	-	-	In stock	Enquiry
MW-W0970530015	Silencer MW SCQ, brass/bronze nickel-plated, 1/2" BSP male	-	-	In stock	Enquiry
MW-W0970530016	Silencer MW SCQ, brass/bronze nickel-plated, 3/4" BSP male	-	-	In stock	Enquiry
MW-W0970530017	Silencer MW SCQ, brass/bronze nickel-plated, 1" BSP male	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A MWSCQ silencer with a male thread, used in compressed-air systems to reduce the noise level. The noise reduction that can be achieved by installing a silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the silencer axis, is on average depending on size 35 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: from -10°C to +80°C. pressure working: up to 12 bar.