Is the Three-piece adaptor for high-pressure cleaning equipment, brass compatible with M22x1.5 fittings and safe to use up to 280 bar and +160Â°C?

Yes. The Three-piece adaptor for high-pressure cleaning equipment, brass is described with a metric connection M22x1.5, is made of brass, and is rated for a working pressure up to 280 bar and an operating temperature up to +160Â°C. Based on that description, it is compatible with M22x1.5 fittings and specified as safe to use up to 280 bar and +160Â°C. Note: always verify compatibility with your specific system, seals, and local safety standards before use and inspect for wear or damage regularly.

Can the Three-piece adaptor for high-pressure cleaning equipment, brass be used with non-metric fittings or adapters?

No - the Three-piece adaptor for high-pressure cleaning equipment, brass is specified for a metric connection M22x1.5, so it is designed for metric fittings. Using it with non-metric (imperial) fittings or adapters is not recommended without a proper, certified conversion adapter because thread pitch and diameter will not match, risking leaks or failure under the stated working pressure (up to 280 bar) and temperature (up to +160Â°C). If you need to connect to non-metric equipment, obtain a dedicated adapter rated for the same pressure and temperature and compatible with M22x1.5.

Does the Three-piece adaptor for high-pressure cleaning equipment, brass require specific maintenance intervals for safe use up to 280 bar?

The Three-piece adaptor for high-pressure cleaning equipment, brass does not have a specific maintenance interval stated in the provided description. However, safe use up to 280 bar requires regular inspection and basic maintenance practices: - Inspect before each use: check for visible damage, cracks, corrosion, thread wear, deformations and clean sealing surfaces. - After heavy use or exposure to contaminants/chemicals: disassemble, clean and inspect O-rings/seals; replace any damaged seals or components. - Periodic pressure testing: perform functional leak and pressure tests at intervals appropriate to usage intensity (e.g., monthly for heavy professional use, quarterly for moderate use, annually for light/private use) or per local regulations. - Lubrication and sealing: use compatible lubricants on threads/seals and replace O-rings with correct material rated for up to +160Â°C and 280 bar. - Replace worn parts: any sign of brass erosion, thread stripping, persistent leaks or deformationâreplace the adaptor. - Follow manufacturer instructions and local safety standards: if manufacturer provides specific intervals or service life, follow those; otherwise adopt conservative inspection/test frequency based on operating conditions. Summary: while no fixed interval is specified in the description, apply pre-use inspections every time, routine cleaning and seal replacement as needed, and periodic pressure testing tailored to usage intensity to ensure safe operation up to 280 bar.

Three-piece adaptor for high-pressure cleaning equipment, brass

Additional information

Material	B – brass (bronze)

Three-part adapter for high-pressure cleaning devices with metric connection M22x1.5. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MH-240026	Adapter 3 pcs. GW M22x1.5 / GZ 1/2"	-	280	In stock	Enquiry
MH-240027	Adapter 3 pcs. GW M22x1.5 / GZ 3/8"	-	280	In stock	Enquiry
MH-240028	Adapter 3 pcs. GW M22x1.5 / GW 3/8"	-	280	In stock	Enquiry
MH-240029	Adapter 3 pcs. GW M22x1.5 / GZ 1/4"	-	280	In stock	Enquiry
MH-240030	Adapter 3 pcs. GW M22x1.5 / GW 1/4"	-	280	In stock	Enquiry
MH-240031	Adapter 3 pcs. GW M22x1.5 / GW 1/8"	-	280	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Three-part adapter for high-pressure cleaning devices with metric connection M22x1.5. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.