Is the NiTO high-pressure connector with metric GZ, hardened steel rated for continuous use at 180 bar and +150Â°C?

Yes. The NiTO high-pressure connector with metric GZ, hardened steel is rated for continuous use at 180 bar and up to +150Â°C. The product description specifies the working pressure as 180 bar and the operating temperature as +150Â°C, and the hardened steel construction supports those conditions.

Can the NiTO high-pressure connector with metric GZ, hardened steel be used for intermittent service at 180 bar and +150Â°C?

Yes. The NiTO high-pressure connector with metric GZ, hardened steel can be used for intermittent service at 180 bar and +150Â°C. Its specified working pressure is 180 bar and its operating temperature is +150Â°C, matching your stated service conditions. Ensure connections are properly tightened, compatible with mating parts, and inspect seals and threads for wear before use; follow NiTOâs installation and maintenance guidelines for safe intermittent operation.

Does the NiTO high-pressure connector with metric GZ, hardened steel require special sealing for 180 bar at +150Â°C?

No, the NiTO high-pressure connector with metric GZ, hardened steel does not normally require a special additional sealing method beyond standard practice when used at 180 bar and +150Â°Câprovided the correct sealing components and installation procedures for its external metric (GZ) thread are used. For reliable, leak-free performance at that pressure and temperature you should: - Use the manufacturer-recommended sealing type for metric G (GZ) threads (typically PTFE tape or a suitable thread sealant) compatible with hardened steel and withstanding +150Â°C and 180 bar. - Ensure the sealant chosen is rated for continuous use at the specified temperature and pressure and chemically compatible with the conveyed fluid. - Apply the sealant properly (correct tape thickness/wrap direction or correct amount of liquid sealant) to avoid extrusion under high pressure. - Tighten to the recommended torque to prevent thread damage while ensuring sufficient compression of the thread seal. - Inspect mating faces and threads for damage, and replace any damaged parts. - Where repeated disconnection or highest safety margins are needed, consider using dedicated metal-to-metal seals, O-rings, or gasket solutions specified by NiTO for high-temperature/high-pressure applications. - Follow NiTOâs installation and maintenance guidelines and, if in doubt, consult NiTO technical support for confirmation of the recommended sealing method for your specific fluid, cycle frequency, and safety requirements. Using an inappropriate low-temperature or pressure-rated sealant, or incorrect application, may lead to leaks or seal failure at 180 bar / +150Â°C.

NiTO high-pressure connector with metric GZ, hardened steel

Additional information

Material	CS – steel (cast iron)

NiTO quick coupling plug for high-pressure water with external metric thread. Material: hardened steel. Working pressure: 180 bar. Operating temperature: +150°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
NT-65641B9	Quick-connect plug high pressure GZ M22x1.5	-	180	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

NiTO quick coupling plug for high-pressure water with external metric thread. Material: hardened steel. Working pressure: 180 bar. Operating temperature: +150°C.