Is the Measuring connection M16x2 bulkhead with metal or plastic cap and DIN 2353 connector for pipes, 24Â° cone compatible with hydraulic systems up to 630 bar?

Yes. The Measuring connection M16x2 bulkhead with metal or plastic cap and DIN 2353 connector for pipes, 24Â° cone is compatible with hydraulic systems up to 630 bar. It is made of steel with zinc-nickel coating, uses NBR sealing, and is rated for a working pressure of 630 bar. Operating temperature range is -30Â°C to +120Â°C (with plastic cap: -30Â°C to +100Â°C). The coupling follows ISO 15171-2 with M16x2 measurement thread and DIN 2353 24Â° cone heavy series S for hydraulic installation.

Does the Measuring connection M16x2 bulkhead with metal or plastic cap and DIN 2353 connector for pipes, 24Â° cone support NBR sealing at -30Â°C to +120Â°C?

Measuring connection M16x2 bulkhead with metal or plastic cap and DIN 2353 connector for pipes, 24Â° cone supports NBR sealing at -30Â°C to +120Â°C: Yes. The product uses NBR sealing and its specified operating temperature range is -30Â°C to +120Â°C (note: with plastic cap the max is +100Â°C).

Can the Measuring connection M16x2 bulkhead with metal or plastic cap and DIN 2353 connector for pipes, 24Â° cone be used with zinc-nickel coated steel fittings?

Yes. The Measuring connection M16x2 bulkhead with metal or plastic cap and DIN 2353 connector for pipes, 24Â° cone can be used with zincânickel coated steel fittings. The coupling itself is made of steel with a zincânickel coating, rated for a working pressure of 630 bar, and uses NBR sealing suitable for temperatures from â30 Â°C to +120 Â°C (plastic cap limits to +100 Â°C). Compatibility considerations: - Material match: Both the measuring connection and the fittings are zincânickel coated steel, so galvanic compatibility and similar corrosion resistance are ensured. - Pressure and temperature: Ensure the mating fittings and system components are rated for the same maximum pressure (630 bar) and operating temperature range. - Thread and sealing: The measurement end uses M16x2 per ISO 15171â2 and the hydraulic connection uses DIN 2353 24Â° cone heavy series S; mating fittings must match these standards for proper sealing and mechanical fit. - Seals and caps: NBR seals are suitable within the stated temperature range and compatible with common hydraulic fluids; verify fluid compatibility with NBR. If using the plastic cap, note the reduced maximum temperature (+100 Â°C). Conclusion: When the mating fittings conform to M16x2 (ISO 15171â2) and DIN 2353 24Â° cone (heavy series S), are zincânickel coated steel, and meet the same pressure, temperature and fluid compatibility requirements, the Measuring connection M16x2 bulkhead with metal or plastic cap and DIN 2353 connector for pipes, 24Â° cone is compatible and safe to use.

M16x2 bulkhead measurement connection with metal or plastic cap and DIN 2353 connection for pipes, 24° cone

All products, Measurement couplings/

Additional information

Material	CS – steel (cast iron)

M16x2 measurement connection with a metal or plastic cap. The coupling has the ISO 15171-2 standard M16x2 thread on the measuring end, and an appropriate connection to the hydraulic system per DIN 2353, 24° cone, heavy series S. Material: steel with zinc-nickel coating. Working pressure: 630 bar. Sealing: NBR. Operating temperature: from -30°C to +120°C (from -30°C to +100°C with a plastic cap).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
PS-620-06-108-50	Measurement coupling M16x2, connection bulkhead DIN2353 M16x1.5, 08S, plastic cap	-	630	In stock	Enquiry
PS-620-06-108-51	Measurement coupling M16x2, connection bulkhead DIN2353 M16x1.5, 08S, metal cap	-	630	In stock	Enquiry
PS-620-06-110-50	Measurement coupling M16x2, connection bulkhead DIN2353 M18x1.5, 10S, plastic cap	-	630	In stock	Enquiry
PS-620-06-110-51	Measurement coupling M16x2, connection bulkhead DIN2353 M18x1.5, 10S, metal cap	-	630	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

M16x2 measurement connection with a metal or plastic cap. The coupling has the ISO 15171-2 standard M16x2 thread on the measuring end, and an appropriate connection to the hydraulic system per DIN 2353, 24° cone, heavy series S. Material: steel with zinc-nickel coating. Working pressure: 630 bar. Sealing: NBR. Operating temperature: from -30°C to +120°C (from -30°C to +100°C with a plastic cap).