Can the DKM 90Â° hydraulic end, type ZMW260, carbon steel be used with hoses requiring a 60Â° metal-to-metal cone seal?

Yes. The DKM 90Â° hydraulic end, type ZMW260, carbon steel is specified as a DKM (60Â° metal-to-metal cone) sealing 90Â° angled fitting with an internal metric thread and nut, designed for crimping in hydraulic and industrial hoses using an appropriate crimping sleeve. Therefore it is suitable for use with hoses that require a 60Â° metal-to-metal cone seal, provided you use the correct hose type and matching crimping sleeve and follow manufacturersâ crimping and installation specifications.

Does the DKM 90Â° hydraulic end, type ZMW260, carbon steel require a specific crimping pressure range for proper sealing?

DKM 90Â° hydraulic end, type ZMW260, carbon steel does not include a specific crimping pressure range in the provided description. The fitting is designed for crimping into hydraulic and industrial hoses using a crimping sleeve appropriate for the hose type; proper sealing depends on correct sleeve selection, compatible hose construction and following the hose and crimping machine manufacturerâs recommended crimp dimensions and pressures. Because the fitting uses metal-to-metal sealing on a 60Â° cone (DKM), achieving the correct swage (crimp) geometry and uniform compression is critical for leak-free performance. Therefore, determine the exact crimping pressure/setting from the hose makerâs specifications and the crimping machine/sleeve manufacturer for the specific hose assembly rather than relying on a generic value.

DKM 90° hydraulic end, type ZMW260, carbon steel

Q: Is the DKM 90Â° hydraulic end, type ZMW260, carbon steel compatible with standard crimping sleeves for hydraulic hoses?

Yes . the DKM 90Â° hydraulic end, type ZMW260, carbon steel is compatible with standard crimping sleeves intended for crimping hydraulic and industrial hoses, provided you use a sleeve matched to the hose type and size. The product description specifies it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Ensure you select the correct sleeve material, diameter and profile for your hose construction and follow the recommended crimping specifications (die set, press force, and crimp dimensions) from the hose and sleeve manufacturers to guarantee a proper, leak-free metal-to-metal 60Â° cone seal and reliable assembly.

All products, Fittings for high-pressure hoses/

DKM 90° hydraulic end, type ZMW260, carbon steel

Additional information

Material	CS – steel (cast iron)

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal metric thread and nut, metal-metal sealing on a 60° cone (DKM), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMW260-12-04	End. 90° G1/2 M12x1.5, hose 1/4", cone 60°	6	-	In stock	Enquiry
TI-ZMW260-14-04	End. 90° G1/2 M14x1.5, hose 1/4", cone 60°	6	-	In stock	Enquiry
TI-ZMW260-16-05	End. 90° G1/2 M16x1.5, hose 5/16", cone 60°	8	-	In stock	Enquiry
TI-ZMW260-16-06	End. 90° G1/2 M16x1.5, hose 3/8", cone 60°	10	-	In stock	Enquiry
TI-ZMW260-18-06	End. 90° G1/2 M18x1.5, hose 3/8", cone 60°	10	-	In stock	Enquiry
TI-ZMW260-20-06	End. 90° G1/2 M20x1.5, hose 3/8", cone 60°	10	-	In stock	Enquiry
TI-ZMW260-20-08	End. 90° G1/2" M20x1.5, hose 1/2", cone 60°	12	-	In stock	Enquiry
TI-ZMW260-22-08	End. 90° G1/2" M22x1.5, hose 1/2", cone 60°	12	-	In stock	Enquiry
TI-ZMW260-24-08	End. 90° G1 M24x1.5, hose 1/2", cone 60°	12	-	In stock	Enquiry
TI-ZMW260-26-10	End. 90° G1 M26x1.5, hose 5/8", cone 60°	16	-	In stock	Enquiry
TI-ZMW260-26-12	End. 90° G1 M26x1.5, hose 3/4", cone 60°	20	-	In stock	Enquiry
TI-ZMW260-27-10	End. 90° G1/2 M27x1.5, hose 5/8", cone 60°	16	-	In stock	Enquiry
TI-ZMW260-28-10	End. 90° G1/2 M28x1.5, hose 5/8", cone 60°	16	-	In stock	Enquiry
TI-ZMW260-30-12	End. 90° G1/2 M30x1.5, hose 3/4", cone 60°	20	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal metric thread and nut, metal-metal sealing on a 60° cone (DKM), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.