Is the DKR hydraulic end, type ZNW110, carbon steel compatible with standard NPSM hoses and crimping sleeves for type Z installations?

Yes. The DKR hydraulic end, type ZNW110, carbon steel is compatible with standard NPSM hoses and crimping sleeves for type Z installations. It features an internal NPSM cylindrical thread and a 60Â° cone sealing face (DKR), and it is specifically designed for crimping into hydraulic and industrial hoses using a crimping sleeve appropriate for the hose type. Material and galvanization are appropriate for standard crimping processes.

Does the DKR hydraulic end, type ZNW110, carbon steel require a specific crimping sleeve size for hoses with NPSM internal thread?

DKR hydraulic end, type ZNW110, carbon steel does not specify a single required crimping sleeve size in the provided description. It is designed for crimping in hydraulic and industrial hoses using "a crimping sleeve suitable for the type of hose." Therefore you must choose a sleeve that matches the hose dimensions and construction (inner/outer diameter, reinforcement, and manufacturer recommendations) and is compatible with NPSM internal thread sealing on the 60Â° cone. In short: use the crimping sleeve specified for your hose type and size; no unique sleeve size is given for ZNW110 itself.

Can DKR hydraulic end, type ZNW110, carbon steel be used with hoses requiring 60Â° cone (DKR) sealing?

Yes. The DKR hydraulic end, type ZNW110, carbon steel is suitable for use with hoses requiring 60Â° cone (DKR) sealing. The product description specifies an internal NPSM cylindrical thread with sealing on a 60Â° cone (DKR), and it is designed for crimping into hydraulic and industrial hoses using an appropriate crimping sleeve for the hose type. Being carbon steel and galvanized meets typical material requirements for hydraulic fittings. Ensure you use the correct sleeve and crimping process specified for your hose to achieve proper sealing and mechanical integrity.

DKR hydraulic end, type ZNW110, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal NPSM cylindrical thread, sealing on a 60° cone (DKR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: Carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZNW110-04-04	End. GW 1/4" NPSM, hose 1/4", cone 60°	6	-	In stock	Enquiry
TI-ZNW110-06-06	End. GW 3/8" NPSM, hose 3/8", cone 60°	10	-	In stock	Enquiry
TI-ZNW110-08-08	End. GW 1/2" NPSM, hose 1/2", cone 60°	12	-	In stock	Enquiry
TI-ZNW110-12-12	End. GW 3/4" NPSM, hose 3/4", cone 60°	20	-	In stock	Enquiry
TI-ZNW110-16-16	End. GW 1" NPSM, hose 1", cone 60°	25	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal NPSM cylindrical thread, sealing on a 60° cone (DKR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: Carbon steel, galvanized.