Is the Allen bolt with washer, DIN 912, for 6000 series - set, carbon steel supplied in hardness class 12.9 and suitable for SAE flanges?

Yes. Allen bolt with washer, DIN 912, for 6000 series - set, carbon steel is supplied in hardness class 12.9 and is suitable for SAE flanges, as indicated by the description: "Hexagon socket screw with washer, in a set (4 pcs.) for SAE flanges, for series 6000, DIN 912. Hardness class: 12.9. Material: carbon steel."

Are Allen bolt with washer, DIN 912, for 6000 series - set, carbon steel compatible with SAE flange torque specifications?

Yes. Allen bolt with washer, DIN 912, for 6000 series - set, carbon steel are compatible with SAE flange torque specifications if the SAE spec calls for bolts of similar material and strength. These bolts are carbon steel, hardness class 12.9 (high-strength), matching or exceeding typical SAE Grade 8 requirements. Ensure thread size, pitch, and washer type match the SAE flange, and apply the SAE torque values appropriate for the bolt diameter and grade 12.9 (or use Grade 8 torque as a close reference). Always verify with flange manufacturer specs and use proper lubrication and torque wrench for accurate preload.

Does the Allen bolt with washer, DIN 912, for 6000 series - set, carbon steel come pre-lubricated for SAE flange assembly?

No. the Allen bolt with washer, DIN 912, for 6000 series - set, carbon steel does not come described as pre-lubricated for SAE flange assembly based on the provided description. The product information lists format, quantity (set of 4), application (for SAE flanges, series 6000), hardness class (12.9) and material (carbon steel), but it does not mention any coating, lubrication, or anti-seize treatment. If pre-lubrication or a specific coating (e.g., phosphate, zinc, or anti-seize) is required for your SAE flange assembly, you should request confirmation from the supplier or arrange for appropriate lubrication/coating prior to installation.

Bolt imbusowa with washer, DIN 912, for serii 6000 – komplet, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Bolt imbusowa with washer, in komplecie (4 szt.) for flanges SAE, for serii 6000, DIN 912. class hardness: 12.9. Material: carbon steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZSK-08X30	Bolt hex socket M8x30 with washer, DIN 912, class 12.9, black	-	-	In stock	Enquiry
TI-ZSK-10X35	Bolt hex socket M10x35 with washer, DIN 912, class 12.9, black	-	-	In stock	Enquiry
TI-ZSK-14X50	Bolt hex socket M14x50 with washer, DIN 912, class 12.9, black	-	-	In stock	Enquiry
TI-ZSK-16X55	Bolt hex socket M16x55 with washer, DIN 912, class 12.9, black	-	-	In stock	Enquiry
TI-ZSK-20X70	Bolt hex socket M20x70 with washer, DIN 912, class 12.9, black	-	-	In stock	Enquiry
TI-ZSK-24X90	Bolt hex socket M24x90 with washer, DIN 912, class 12.9, black	-	-	In stock	Enquiry
TI-ZSK-30X100	Bolt hex socket M30x100 with washer, DIN 912, class 12.9, black	-	-	In stock	Enquiry