Is the Complete BANJO angle plug connector, type R54 compatible with both vacuum and compressed air systems up to 16 bar?

Yes. The Complete BANJO angle plug connector, type R54 is compatible with both vacuum and compressed air systems up to 16 bar. Its specification lists working pressure 16 bar and working medium as vacuum and air, with NBR sealing, nickel-plated brass construction, and an operating temperature range of â20Â°C to +80Â°C.

Can the Complete BANJO angle plug connector, type R54 be used with fluids other than air and vacuum, and what are the sealing limitations?

Complete BANJO angle plug connector, type R54 is specified for vacuum and air only. Its sealing uses NBR (nitrile) and the body is nickelâplated brass, rated to 16 bar and â20Â°C to +80Â°C. Using fluids other than air/vacuum may be possible only after verifying chemical compatibility with NBR and brass and confirming pressure/temperature limits for that fluid. NBR has limited resistance to hydrocarbons, ketones, strong acids/alkalis and some solvents, so fuels, many oils and aggressive chemicals can swell or degrade the seal, causing leaks. For any nonâair medium, consult the fluidâs compatibility with NBR and brass and perform pressure/temperature tests; if incompatible, choose a connector with a suitable seal material (e.g. FKM, EPDM) and compatible construction.

Does the Complete BANJO angle plug connector, type R54 require special maintenance for NBR sealing at temperature extremes?

No special maintenance is required specifically for the NBR sealing of the Complete BANJO angle plug connector, type R54 under normal use within its specified temperature range (-20Â°C to +80Â°C). NBR (nitrile rubber) performs well for air and vacuum applications and at the stated working pressure (16 bar). To ensure reliable sealing and long life, follow general good-practice maintenance: - Operate the connector only within the specified temperature and pressure limits. Extended exposure beyond -20Â°C or +80Â°C can harden or degrade NBR, reducing sealing performance. - Keep mating surfaces clean and free of debris, oils or chemicals that may attack NBR (strong acids, ketones, aromatic hydrocarbons). - Inspect seals periodically for cuts, swelling, cracking or extrusion, especially after thermal cycling or heavy use; replace seals if damaged. - Avoid aggressive cleaning agents; use mild soap and water or manufacturer-recommended lubricants compatible with NBR if lubrication is needed. - Ensure proper assembly torque and avoid mechanical damage to the sealing lip during connection/disconnection. Following these standard precautions will maintain reliable sealing of the Complete BANJO angle plug connector, type R54 at the specified temperature extremes.

Complete BANJO angle plug connector, type R54

All products, Push-in fittings/

Additional information

Material	B – brass (bronze)

Complete angled plug connector BANJO, type R54, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2L54001	Complete BANJO connector RL54 hose 4 mm, GZ M5	-	16	In stock	Enquiry
MW-2L54002	Complete BANJO fitting RL54 hose 4 mm, GZ BSP 1/8"	-	16	In stock	Enquiry
MW-2L54007	Complete BANJO fitting RL54 hose 6 mm, GZ M5	-	16	In stock	Enquiry
MW-2L54008	Complete BANJO fitting RL54 hose 6 mm, GZ BSP 1/8"	-	16	In stock	Enquiry
MW-2L54009	Complete BANJO fitting RL54 hose 6 mm, GZ BSP 1/4"	-	16	In stock	Enquiry
MW-2L54010	Complete BANJO fitting RL54 hose 8 mm, GZ BSP 1/8"	-	16	In stock	Enquiry
MW-2L54011	Complete BANJO fitting RL54 hose 8 mm, GZ BSP 1/4"	-	16	In stock	Enquiry
MW-2L54012	Complete BANJO fitting RL54 hose 8 mm, GZ BSP 3/8"	-	16	In stock	Enquiry
MW-2L54013	Complete BANJO fitting RL54 hose 10 mm, GZ BSP 1/4"	-	16	In stock	Enquiry
MW-2L54014	Complete BANJO fitting RL54 hose 10 mm, GZ BSP 3/8"	-	16	In stock	Enquiry
MW-2L54016	Complete BANJO fitting RL54 hose 12 mm, GZ BSP 3/8"	-	16	In stock	Enquiry
MW-2L54017	Complete BANJO fitting RL54 hose 12 mm, GZ BSP 1/2"	-	16	In stock	Enquiry
MW-2L54018	Complete BANJO fitting RL54 hose 12 mm, GZ BSP 1/4"	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Complete angled plug connector BANJO, type R54, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.