Is the Standard jaw set for FINN-POWER P16 press brake compatible with surface-hardened steel tooling and recommended for long-term use?

Yes. The Standard jaw set for FINN-POWER P16 press brake is made from surface-hardened steel, which makes it compatible with surface-hardened steel tooling and suitable for long-term use. Surface hardening increases wear resistance and durability, so this jaw set is appropriate for repeated bending and crimping operations and offers longevity when properly maintained.

Can the Standard jaw set for FINN-POWER P16 press brake withstand repeated use on surface-hardened steel without accelerated wear?

Yes. The Standard jaw set for FINN-POWER P16 press brake, made of surface-hardened steel, is engineered to withstand repeated use on surface-hardened materials without accelerated wear. Surface hardening increases resistance to abrasion and indentation while maintaining a tougher core to absorb impact and prevent cracking. For best longevity, use correct tooling clearance, avoid excessive over-bending or misalignment, and perform regular inspection and maintenance (cleaning, lubrication, and timely replacement when wear indicators appear). Under normal operating conditions and proper maintenance, the Standard jaw set for FINN-POWER P16 press brake will provide durable service life.

Does the Standard jaw set for FINN-POWER P16 press brake require special maintenance when used on surface-hardened steel?

No. The Standard jaw set for FINN-POWER P16 press brake (Material: surface-hardened steel) does not require special maintenance beyond standard practices. Because the jaws are made of surfaceâhardened steel, they are more wearâresistant and suitable for bending operations involving abrasive or highâstress contact. Recommended routine care includes: - Regular cleaning to remove dust, chips and residues that could cause abrasive wear. - Periodic inspection for chips, cracks or excessive wear; replace or regrind if damage is found. - Light lubrication of nonâworking surfaces and guide/contact areas as per machine manufacturerâs guidelines; avoid lubricating the working bending surfaces unless specified. - Ensure correct alignment and secure fastening to the press brake to prevent uneven loading. - Follow the press and tooling manufacturerâs suggested maintenance intervals and operating limits (material thickness, bend radii, tonnage). If you plan to bend particularly abrasive materials, hardened tool steels, or use extremely high tonnages, increase inspection frequency. For any special applications or uncertainty, consult FinnâPower documentation or their technical support.

A set of jaws standard for press crimping FINN-POWER P16

Additional information

A set of standard jaws for a FINN-POWER type P16 crimping press. Material: surface-hardened steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
FP-16-04	Set jaws 4 mm type 16 (L=55 mm)	-	-	In stock	Enquiry
FP-16-05	Set jaws 5 mm type 16 (L=55 mm)	-	-	In stock	Enquiry
FP-16-06	Set jaws 6 mm type 16 (L=55 mm)	-	-	In stock	Enquiry
FP-16-07	Set jaws 7 mm type 16 (L=55 mm)	-	-	In stock	Enquiry
FP-16-08	Set jaws 8 mm type 16 (L=55 mm)	-	-	In stock	Enquiry
FP-16-09	Set jaws 9 mm type 16 (L=55 mm)	-	-	In stock	Enquiry
FP-16-10	Set jaws 10 mm type 16 (L=55 mm)	-	-	In stock	Enquiry
FP-16-12	Set jaws 12 mm type 16 (L=55 mm)	-	-	In stock	Enquiry
FP-16-14	Set jaws 14 mm type 16 (L=55 mm)	-	-	In stock	Enquiry
FP-16-16	Set jaws 16 mm type 16 (L=55 mm)	-	-	In stock	Enquiry
FP-16-19	Set jaws 19 mm type 16 (L=55 mm)	-	-	In stock	Enquiry
FP-16-23	Set jaws 23 mm type 16 (L=55 mm)	-	-	In stock	Enquiry
FP-16-27	Set jaws 27 mm type 16 (L=65 mm)	-	-	In stock	Enquiry
FP-16-31	Set jaws 31 mm type 16 (L=65 mm)	-	-	In stock	Enquiry