Is the TUBOMATIC H25 PI press brake compatible with standard EC-type metal sleeves for 10â25 mm low-pressure hoses?

Yes. The TUBOMATIC H25 PI press brake is designed specifically for crimping low-pressure hoses with EC-type metal sleeves and supports a crimping diameter range of 10â25 mm. It comes with three sets of jaws (10â13 mm, 13â16 mm, 16â25 mm), so it is compatible with standard EC-type metal sleeves for hoses in the 10â25 mm range.

Can the TUBOMATIC H25 PI press brake handle quick-change of the three jaw sets for different sleeve diameters?

Yes. The TUBOMATIC H25 PI press brake is supplied with three complete jaw sets (each set contains 6 crimping segments) sized 10â13 mm, 13â16 mm and 16â25 mm, covering the full crimping range of 10â25 mm. The unit is described as easy and lightweight, which facilitates changing jaw sets for different sleeve diameters. While the description confirms the availability of the three sets and implies straightforward handling, it does not detail the exact changeover procedure or time; however, the machine is clearly designed to allow quick swap of the supplied jaw sets to accommodate different sleeve diameters.

Does the TUBOMATIC H25 PI press brake include safety features for pneumatic-driven crimping of low-pressure hose sleeves?

The TUBOMATIC H25 PI press brake description provided does not explicitly state specific safety features for pneumatic-driven crimping of low-pressure hose sleeves. It identifies the device as a pneumatic-driven crimping press for EC type metal sleeves, highlights that it is easy and lightweight, and lists the supplied jaw sets and crimping diameter range (10â25 mm). From that information alone, no dedicated safety mechanisms (such as emergency stop, safety guards, twoâhand controls, pressure relief valves, overload protection, or protective interlocks) are mentioned. If you need confirmation of builtâin safety features or compliance with applicable safety standards, request the manufacturerâs technical datasheet, user manual, or CE/EC conformity documentation for the TUBOMATIC H25 PI press brake.

Crimping press TUBOMATIC H25 PI

Additional information

Crimping press TUBOMATIC H25 PI with pneumatic drive, intended for crimping low-pressure hoses with type EC sheet-metal ferrules. easy and light for carrying device, equipped in three sets (po 6 segments clamping) jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. range diameters crimps: 10 ÷ 25 mm.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
OP-TUB-H25PI	Prasa clamping TUBOMATIC H25 pneumatyczna	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Crimping press TUBOMATIC H25 PI with pneumatic drive, intended for crimping low-pressure hoses with type EC sheet-metal ferrules. easy and light for carrying device, equipped in three sets (po 6 segments clamping) jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. range diameters crimps: 10 ÷ 25 mm.