Does the Collet for R6, R7, R8, 1SC hoses, zinc-nickel carbon steel, type BP7 require machining for installation?

Does the Collet for R6, R7, R8, 1SC hoses, zinc-nickel carbon steel, type BP7 require machining for installation? No. The Collet for R6, R7, R8, 1SC hoses, zinc-nickel carbon steel, type BP7 is supplied ready for use and requires no machining for installation. It is a BP7 clamping sleeve specifically designed for these hose types; installation is direct. The component is made of carbon steel with a zinc-nickel coating (6â10 Âµm) offering very high corrosion resistance (up to 720 hours in a salt spray chamber).

Is the Collet for R6, R7, R8, 1SC hoses, zinc-nickel carbon steel, type BP7 ready for immediate installation without any machining?

Yes. The Collet for R6, R7, R8, 1SC hoses, zinc-nickel carbon steel, type BP7 is ready for immediate installation without any machining. The BP7 clamping sleeve is designed for direct installation; no machining is required. It is made of carbon steel with a zinc-nickel coating (6â10 Âµm) offering very high corrosion resistance (up to 720 hours in a salt spray chamber).

Can the Collet for R6, R7, R8, 1SC hoses, zinc-nickel carbon steel, type BP7 be installed without special tools?

Yes. Collet for R6, R7, R8, 1SC hoses, zinc-nickel carbon steel, type BP7 can be installed without special tools. The product description for the BP7 clamping sleeve states "Installation - no machining required," indicating assembly can be done with standard hand tools or common assembly methods used for hose fittings. The sleeveâs design and specified outer diameter (D1) allow it to fit the corresponding hose sizes directly, and the carbon steel body with zinc-nickel coating (6â10 Âµm) provides corrosion resistance but does not necessitate special installation equipment. Standard best practices for hose assembly (clean mating parts, correct positioning, and applying appropriate manual or commonly used workshop tools) should be followed to ensure a secure fit.

Collet for R6, R7, R8, 1SC hoses, zinc-nickel carbon steel, type BP7

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

BP7 clamping sleeve for hoses type R6, R7, R8, and 1SC. Installation – no machining required. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which is characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Diameter D1 [mm] – outer diameter. Material: carbon steel, zinc-nickel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-BP7-03-CN	Sleeve for hose R7, R8, 1SC 3/16", Zn-Ni	5	-	In stock	Enquiry
TI-BP7-04-CN	Sleeve for hose R7, R8, 1SC 1/4", Zn-Ni	6	-	In stock	Enquiry
TI-BP7-05-CN	Sleeve for hose R7, R8, 1SC 5/16", Zn-Ni	8	-	In stock	Enquiry
TI-BP7-06-CN	Sleeve for hose R7, R8, 1SC 3/8", Zn-Ni	10	-	In stock	Enquiry
TI-BP7-08-CN	Sleeve for hose R7, R8, 1SC 1/2", Zn-Ni	12	-	In stock	Enquiry
TI-BP7-10-CN	Sleeve for hose R7, 1SC 5/8", Zn-Ni	16	-	In stock	Enquiry
TI-BP7-12-CN	Sleeve for hose R7, 1SC 3/4", Zn-Ni	20	-	In stock	Enquiry
TI-BP7-16-CN	Sleeve for hose R7, 1SC 1", Zn-Ni	25	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

BP7 clamping sleeve for hoses type R6, R7, R8, and 1SC. Installation – no machining required. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which is characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Diameter D1 [mm] – outer diameter. Material: carbon steel, zinc-nickel.