Is the Collet for hydraulic hoses 1SN, 1ST, 1SC, 2SC, 2TE, steel AISI 316, type Z1T (PH) compatible with external machining on 1ST only and no machining on other hose types?

Yes. The Collet for hydraulic hoses 1SN, 1ST, 1SC, 2SC, 2TE, steel AISI 316, type Z1T (PH) is designed for external machining only on hose type 1ST; all other listed hose types (1SN/R1AT, 1SC, 2SC, 2TE) are to be used without machining.

Can the Collet for hydraulic hoses 1SN, 1ST, 1SC, 2SC, 2TE, steel AISI 316, type Z1T (PH) be used with hydraulic fittings PH only?

Yes. The Collet for hydraulic hoses 1SN, 1ST, 1SC, 2SC, 2TE, steel AISI 316, type Z1T (PH) is designed for use with hydraulic fittings PH only. It is a clamping sleeve for rubber hydraulic hoses type 1SN(R1AT), 1ST, 1SC, 2SC, 2TE, with installation requiring external machining for 1ST and no machining for 1SN(R1AT), 1SC, 2SC, 2TE, and its material is AISI 316 steel.

Does the Collet for hydraulic hoses 1SN, 1ST, 1SC, 2SC, 2TE, steel AISI 316, type Z1T (PH) require D1 measurement for correct selection?

Yes. For correct selection of the Collet for hydraulic hoses 1SN, 1ST, 1SC, 2SC, 2TE, steel AISI 316, type Z1T (PH), the D1 measurement (outer diameter) is required. The product description specifies Diameter D1 [mm] - outer diameter, so you must provide D1 to ensure the collet matches the hose/fitting dimensions and installation type (external machining for 1ST; no machining for 1SN(R1AT), 1SC, 2SC, 2TE).

Ferrule for hoses hydraulic 1SN, 1ST, 1SC, 2SC, 2TE, AISI 316, type Z1T (PH)

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel
Standard length [m]	10, 2

Ferrule Z1T (PH) for rubber hydraulic hoses type 1SN(R1AT), 1ST, 1SC, 2SC, 2TE. Assembly – external skiving (1ST), without skiving (1SN(R1AT), 1SC, 2SC, 2TE). Use for fittings hydraulic (PH). Diameter D1 – outer diameter. Material: AISI 316.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-Z1T-03-SS-PH	Sleeve na hose 1SN (R1AT) 3/16", AISI 316	5	-	In stock	Enquiry
TI-Z1T-04-SS-PH	Sleeve na hose 1SN, 1ST, 2SC, 2TE 1/4", AISI 316	6	-	In stock	Enquiry
TI-Z1T-05-SS-PH	Sleeve na hose 1SN, 1ST, 2SC, 2TE 5/16", AISI 316	8	-	In stock	Enquiry
TI-Z1T-06-SS-PH	Sleeve na hose 1SN, 1ST, 2SC, 2TE 3/8", AISI 316	10	-	In stock	Enquiry
TI-Z1T-08-SS-PH	Sleeve na hose 1SN, 1ST, 2SC, 2TE 1/2", AISI 316	12	-	In stock	Enquiry
TI-Z1T-10-SS-PH	Sleeve na hose 1SN, 1SC, 1ST, 2SC, 2TE 5/8", AISI 316	16	-	In stock	Enquiry
TI-Z1T-12-SS-PH	Sleeve na hose 1SN, 1SC, 1ST, 2SC, 2TE 3/4", AISI 316	20	-	In stock	Enquiry
TI-Z1T-16-SS-PH	Sleeve na hose 1SN, 1SC, 1ST, 2SC, 2TE 1", AISI 316	25	-	In stock	Enquiry
TI-Z1T-20-SS-PH	Sleeve na hose 1SN, 1ST, 2SC, 2TE 1.1/4", AISI 316	32	-	In stock	Enquiry
TI-Z1T-24-SS-PH	Sleeve na hose 1SN, 1ST, 2SC, 2TE 1.1/2", AISI 316	38	-	In stock	Enquiry
TI-Z1T-32-SS-PH	Sleeve na hose 1SN, 1ST, 2SC, 2TE 2", AISI 316	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Ferrule Z1T (PH) for rubber hydraulic hoses type 1SN(R1AT), 1ST, 1SC, 2SC, 2TE. Assembly – external skiving (1ST), without skiving (1SN(R1AT), 1SC, 2SC, 2TE). Use for fittings hydraulic (PH). Diameter D1 – outer diameter. Material: AISI 316.