Is the Plug end with SKV INTERLOCK with lock nut for hose (3/4" Ã· 1.1/2"), galvanized steel compatible with 4SH, R13, and R15 hoses?

Yes. The Plug end with SKV INTERLOCK with lock nut for hose (3/4" Ã· 1.1/2"), galvanized steel is compatible with 4SH, R13, and R15 hoses. It is specifically designed as an INTERLOCK type tail for those hose types, fits sizes 3/4" to 1.1/2", has NBR sealing, and is made of galvanized steel.

Does the Plug end with SKV INTERLOCK with lock nut for hose (3/4" Ã· 1.1/2"), galvanized steel use NBR seals suitable for 4SH, R13, and R15 hoses?

Yes. Plug end with SKV INTERLOCK with lock nut for hose (3/4" Ã· 1.1/2"), galvanized steel uses NBR seals and is designed for hydraulic hoses type 4SH, R13, and R15, so it is suitable for those hose types.

Can the Plug end with SKV INTERLOCK with lock nut for hose (3/4" Ã· 1.1/2"), galvanized steel withstand hydraulic pressures typical for 4SH, R13, and R15?

Yes. Plug end with SKV INTERLOCK with lock nut for hose (3/4" Ã· 1.1/2"), galvanized steel is designed specifically for hydraulic hoses types 4SH, R13, and R15 and, when installed correctly on the matching hose sizes (3/4" to 1.1/2"), can withstand the typical working pressures for those hose types. Key points: - Compatibility: The INTERLOCK âtailâ geometry and lock nut are intended for 4SH, R13 and R15 constructions, ensuring secure mechanical engagement with the hose reinforcement layers. - Pressure capability: 4SH, R13 and R15 hoses are high-pressure, multi-wire-braid or spiral types; fittings marketed for these hoses are manufactured and rated to match their working and test pressures. When the Plug end with SKV INTERLOCK is assembled according to the manufacturerâs crimping/assembly instructions and used with hoses of the specified nominal sizes, it will meet the hosesâ rated working pressures. - Sealing and materials: The NBR seal provides appropriate hydraulic sealing for common mineral oils; galvanized steel body gives mechanical strength and corrosion resistance typical for many hydraulic applications. - Important caveats: Pressure performance depends on correct hose/fitting matching (exact nominal hose series and size), proper assembly/crimping with the correct die and crimp parameters, and using the fitting within its specified temperature and fluid compatibility limits. Do not substitute or reuse damaged components. Verify the manufacturerâs technical data sheet and pressure ratings for the specific size and assembly configuration before service. Conclusion: When properly matched and installed, Plug end with SKV INTERLOCK with lock nut for hose (3/4" Ã· 1.1/2"), galvanized steel is suitable to withstand the typical hydraulic pressures of 4SH, R13, and R15 systems.

Plug end with SKV INTERLOCK with lock nut for hose (3/4″ ÷ 1.1/2″), galvanized steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

SKV plug coupling with a locking nut and INTERLOCK type “tail” designed for hydraulic hoses type 4SH, R13, R15 (in sizes 3/4″ to 1.1/2″). Sealing: NBR. Material: galvanized steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-SKV-IL-M-12-12	End plug SKV INTERLOCK 3/4" with locking nut, hose 3/4"	-	420	In stock	Enquiry
TI-SKV-IL-M-16-16	End plug SKV INTERLOCK 1" with locking nut, hose 1"	-	420	In stock	Enquiry
TI-SKV-IL-M-20-20	End plug SKV INTERLOCK 1.1/4" with locking nut, hose 1.1/4"	-	420	In stock	Enquiry
TI-SKV-IL-M-24-24	End fitting SKV INTERLOCK 1.1/2" with locking nut, hose 1.1/2"	-	420	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

SKV plug coupling with a locking nut and INTERLOCK type “tail” designed for hydraulic hoses type 4SH, R13, R15 (in sizes 3/4″ to 1.1/2″). Sealing: NBR. Material: galvanized steel.