Can the CEL hydraulic end for UHP light series hose, carbon steel, type PMZ111 be crimped with standard UHP thermoplastic hose sleeves and which crimp specifications apply?

Yes. The CEL hydraulic end for UHP light series hose, carbon steel, type PMZ111 is designed specifically for crimping into UHP thermoplastic hoses. It features a special "tail" for thermoplastic hose and external metric thread with 24Â° cone sealing (CEL), and must be crimped using a crimping sleeve matched to the hose type. Crimp specifications: - Use a crimping sleeve approved for the exact UHP thermoplastic hose model and diameter you are using; sleeve profile must match the hose layline and reinforcement. - Follow the hose manufacturerâs recommended crimping dimensions (sleeve length, die set, and crimp diameter/tolerance) for the specific hose size. The PMZ111 is for the light (UHP) series . use the sleeve and die set rated for that series. - Ensure correct placement: the hose must be fully seated over the PMZ111 tail so the sleeve covers the hose end and the fitting tail per the hose makerâs instructions. - Apply the manufacturer-specified crimp force/profile using a calibrated hydraulic crimper to achieve the required final crimp diameter and uniform hex/oval form as specified for the sleeve/hose assembly. - Verify assembly by visual inspection and, if required, pressure testing per the hose and sleeve manufacturer guidelines. In short: yes.crimp with a crimping sleeve appropriate to the specific UHP thermoplastic hose and follow that hose/sleeve makerâs crimp dimensions, die set, and testing procedures when using the CEL hydraulic end for UHP light series hose, carbon steel, type PMZ111.

Is the CEL hydraulic end for UHP light series hose, carbon steel, type PMZ111 compatible with alternative crimping machines and dies?

CEL hydraulic end for UHP light series hose, carbon steel, type PMZ111 is designed specifically for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for that hose type. Its sealing relies on an external metric thread and a 24Â° cone, and it features a special tail for thermoplastic hose. Because proper sealing and mechanical integrity depend on matching sleeve geometry, crimp profile and machine force, PMZ111 may not be compatible with arbitrary alternative crimping machines and dies. Compatibility is possible only if the alternative machine and die set produce the same crimp diameter, profile and pressure as the original specification for the UHP thermoplastic hose and sleeve intended for PMZ111. Verify with the hose/sleeve manufacturer or machine supplier and perform validation tests before use.

Does the CEL hydraulic end for UHP light series hose, carbon steel, type PMZ111 require a specific crimp sleeve material or thickness?

No. the CEL hydraulic end for UHP light series hose, carbon steel, type PMZ111 does not mandate a unique crimp sleeve material or thickness in its description. It is designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the type of hose. That means you must select a crimp sleeve whose material, diameter and wall thickness are specified by the hose manufacturer (or the crimping-sleeve supplier) for that particular UHP thermoplastic hose and crimping process. Use a sleeve compatible with the hose construction and rated for the operating pressure; follow the hose makerâs recommended sleeve material (commonly steel, stainless steel or galvanized steel), dimensions and crimping specifications to ensure a proper, leak-free crimp with the CEL hydraulic end for UHP light series hose, carbon steel, type PMZ111.

CEL hydraulic end for UHP light series hose, carbon steel, type PMZ111

Additional information

Material	CS – steel (cast iron)

Hydraulic end (type P – with a special “tail” for thermoplastic hose) with external metric thread, sealing on a 24° cone (CEL), lightweight series. Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
TI-PMZ111-14-04-TO	End. GZ M14x1.5, thermoplastic hose 1/4", 24°, lightweight, CEL	6	800	In stock	0 zł		Enquiry
TI-PMZ111-18-06-TO	End. GZ M18x1.5, thermoplastic hose 3/8", 24°, light, CEL	10	800	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hydraulic end (type P – with a special “tail” for thermoplastic hose) with external metric thread, sealing on a 24° cone (CEL), lightweight series. Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.