FINN-POWER P20 CS press brake
The P20 CS press is powered by a 1.6 kW electric motor with a voltage of 12 V or a 2.2 kW motor with a voltage of 24 V, supplied from a battery, specifically designed for equipping service vehicles and technical wagons. The clamp diameter is adjustable using a micrometric knob. The achievement of the clamp diameter is indicated electrically via an LED indicator. The press is available in two versions where the clamping head can be positioned on the right or left side. All FINN-POWER clamping presses are adapted for use with interchangeable jaw sets (ordered separately). For example, for a clamp diameter range from 10 to 61 mm, 12 sets of standard jaws from FP-20-10 to FP-20-54 should be ordered.
List of product variants
| Article number | Product variant name | Nominal inner diameter | Working pressure [bar] | Enquiry |
|---|---|---|---|---|
| FP-P20CS-12V-L | FINN POWER type P20 CS 12V crimping press, left | - | - | |
| FP-P20CS-12V-R | FINN POWER type P20 CS 12V crimping press, right | - | - | |
| FP-P20CS-24V-L | FINN POWER type P20 CS 24V crimping press, left | - | - | |
| FP-P20CS-24V-R | FINN POWER type P20 CS 24V crimping press, right | - | - |
The P20 CS press is powered by a 1.6 kW electric motor with a voltage of 12 V or a 2.2 kW motor with a voltage of 24 V, supplied from a battery, specifically designed for equipping service vehicles and technical wagons. The clamp diameter is adjustable using a micrometric knob. The achievement of the clamp diameter is indicated electrically via an LED indicator. The press is available in two versions where the clamping head can be positioned on the right or left side. All FINN-POWER clamping presses are adapted for use with interchangeable jaw sets (ordered separately). For example, for a clamp diameter range from 10 to 61 mm, 12 sets of standard jaws from FP-20-10 to FP-20-54 should be ordered.
