Is the UHP CHEMICAL thermoplastic hose, type 5 rated for continuous use with solvents at +100Â°C or only up to +65Â°C for water-based fluids?

The UHP CHEMICAL thermoplastic hose, type 5 is rated for an overall operating temperature range up to +100Â°C, but with a specific limitation: for water and water-based fluids its maximum continuous temperature is limited to +65Â°C. For solvents and aggressive chemical substances (paints, solvents) the general stated operating temperature up to +100Â°C applies, provided compatible chemical resistance and pressure ratings are maintained. In short: solvents . continuous use up to +100Â°C; water/water-based fluids . only up to +65Â°C.

Can UHP CHEMICAL thermoplastic hose, type 5 be used continuously with strong solvents at temperatures up to +100Â°C?

No. UHP CHEMICAL thermoplastic hose, type 5 is rated for an operating temperature up to +100Â°C, but the specification explicitly limits continuous use with water and water-based fluids to a maximum of +65Â°C. Strong solvents are aggressive chemical media and the hose inner layer is polyamide with polyurethane outer cover-materials whose long-term chemical and thermal resistance to strong solvents at +100Â°C is not guaranteed by the data provided. For continuous transfer of strong solvents at elevated temperatures you should consult the manufacturer for chemical compatibility and long-term temperature ratings or select a hose specifically certified for continuous solvent service at +100Â°C.

Can UHP CHEMICAL thermoplastic hose, type 5 safely handle aggressive solvents continuously at +100Â°C?

No. UHP CHEMICAL thermoplastic hose, type 5 is not rated to safely handle aggressive solvents continuously at +100Â°C. Although the hoseâs overall operating temperature range is listed as â40Â°C to +100Â°C, the specification explicitly limits water and water-based fluids to a maximum continuous temperature of +65Â°C. The hose is described for transfer of aggressive chemical substances (paints and solvents) with a polyamide inner layer, aramid and steel reinforcement, and a polyurethane outer cover, and a working pressure up to 700 bar. However, the manufacturerâs separate note restricting certain fluids to lower maximum temperatures indicates that chemical compatibility and long-term thermal resistance must be confirmed per fluid type. Aggressive organic solvents can degrade polymers (including polyamide and polyurethane) faster at elevated temperatures, reducing hose life and risking leaks or failures. Recommendation: consult the manufacturerâs chemical compatibility and temperature-dependence data for the specific solvent, or request a validated hose rating/certificate for continuous service at +100Â°C with that solvent before use.

Hose thermoplastic UHP CHEMICAL, type 5

Additional information

Material	PA – polyamide
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Hose intended for conveying aggressive substances chemical such jak paints, solvents. Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. pressure working: 700 bar. temperature use: from -40°C to +100°C (for water and liquids na base water max. up to +65°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
UH-0482-06	Hose thermoplastic VHP AGGRESSIVE CHEMICALS 1/4"	6	700	In stock	Enquiry
UH-0484-10	Hose thermoplastic VHP AGGRESSIVE CHEMICALS 3/8"	10	700	In stock	Enquiry
UH-MTKMMARINE-10	Hose thermoplastic MTKM MARINE 3/8"	10	700	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hose intended for conveying aggressive substances chemical such jak paints, solvents. Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. pressure working: 700 bar. temperature use: from -40°C to +100°C (for water and liquids na base water max. up to +65°C).