Is the UHP TWIN thermoplastic hose, type 2 suitable for continuous use at +100Â°C with hydraulic oil, or is it limited to +65Â°C for water-based fluids?

The UHP TWIN thermoplastic hose, type 2 is rated for an overall operating temperature range from -40Â°C to +100Â°C. However, the specification includes a clear limitation: for water and water-based fluids the maximum recommended continuous temperature is +65Â°C. Therefore, for hydraulic oil (which is not water-based), continuous use up to +100Â°C is within the stated operating range. For water or water-based hydraulic fluids you must not exceed +65Â°C. Ensure compatibility with your specific hydraulic oil and system conditions (pressure, additives, dynamic flexing) and consult the hose manufacturer for confirmation if operating continuously at the upper temperature limit.

Can UHP TWIN thermoplastic hose, type 2 be used continuously at +100Â°C with hydraulic oil, or is it limited to +65Â°C for water-based fluids?

UHP TWIN thermoplastic hose, type 2 can be used continuously at +100Â°C with hydraulic oil. The specified operating temperature range is -40Â°C to +100Â°C, but the note restricting âfor water and water-based fluids max. up to +65Â°Câ refers only to water-based media. Therefore hydraulic oil is acceptable up to +100Â°C; water-based fluids must be limited to +65Â°C.

Can UHP TWIN thermoplastic hose, type 2 handle +100Â°C hydraulic oil continuously, and +65Â°C for water-based fluids?

Yes. UHP TWIN thermoplastic hose, type 2 can continuously handle hydraulic oil at up to +100Â°C and water-based fluids up to +65Â°C. The hoseâs specified operating temperature range is â40Â°C to +100Â°C, with the explicit limitation that for water and water-based fluids the maximum is +65Â°C. This is due to material and fluid compatibility considerations in the hose construction (polyester inner layer, aramid + steel braid reinforcement, polyurethane outer layer) and must be respected to ensure safe operation at the rated working pressure (700 bar).

Hose thermoplastic UHP TWIN, type 2

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	check
Standard length [m]	10

Hose double consisting with two cores hose type STANDARD. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. pressure working: 700 bar. temperature use: from -40°C to +100°C (for water and liquids na base water max. up to +65°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
UH-1412-06	Hose thermoplastic VHP 10000 TWIN 2x1/4"	6	700	In stock	0 zł		Enquiry
UH-1414-10	Hose thermoplastic VHP 10000 TWIN 2x3/8"	10	700	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hose double consisting with two cores hose type STANDARD. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. pressure working: 700 bar. temperature use: from -40°C to +100°C (for water and liquids na base water max. up to +65°C).