Is the BANJO metric RNM hydraulic end, type ZMB600, carbon steel, Y compatible with standard crimping sleeves for industrial hydraulic hoses?

Yes . the BANJO metric RNM hydraulic end, type ZMB600, carbon steel, Y is compatible with standard crimping sleeves for industrial hydraulic hoses. The description states it is a standard hydraulic end fitting (type Z) with a regular hydraulic tail for hoses, specifically designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Ensure you use a crimping sleeve sized and rated for the specific hose construction and pressure class; follow the hose manufacturerâs and fitting supplierâs recommended sleeve dimensions, crimping force/profile, and assembly procedure to achieve a reliable, leak-free crimp.

Can the BANJO metric RNM hydraulic end, type ZMB600, carbon steel, Y be used with hoses rated for high-pressure hydraulic systems?

Yes - the BANJO metric RNM hydraulic end, type ZMB600, carbon steel, Y Format can be used with hoses rated for high-pressure hydraulic systems, provided the crimping sleeve and hose are specified for the same pressure class and compatible dimensions. It is designed for crimping into hydraulic and industrial hoses using an appropriate crimping sleeve for the hose type. Ensure the hoseâs maximum working pressure, crimp ferrule specification, and thread/seat compatibility match the fittingâs material (carbon steel, galvanized) and application requirements. Always follow hose and crimping equipment manufacturer guidelines and relevant hydraulic standards for pressure ratings, safety factors, and testing after assembly.

Does the BANJO metric RNM hydraulic end, type ZMB600, carbon steel, Y require specific crimping pressure settings?

BANJO metric RNM hydraulic end, type ZMB600, carbon steel, Y Format does not include specific crimping pressure (force) values in the provided description. The product is described as designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose, which implies that correct crimping parameters depend on the hose construction, sleeve type, and crimping machine rather than a fixed setting tied to the fitting itself. Recommended actions: - Use the hose manufacturerâs crimping specifications (crimp diameter, pressure/force, and die profile) for the exact hose assembly. - Select a crimping sleeve compatible with the hose and with the BANJO metric RNM hydraulic end, type ZMB600. - Follow the crimping machine manufacturerâs guidelines for setting force/pressure based on the chosen die and sleeve. - Perform a pull-off and pressure test on sample assemblies to verify crimp integrity and leak-free performance. - If in doubt, contact the hose, sleeve, or crimping machine supplier for recommended crimp settings for your specific hose + BANJO metric RNM hydraulic end, type ZMB600 combination.

Fitting hydraulic BANJO metric RNM, type ZMB600, carbon steel, Y

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic fitting (type Z – with an ordinary hydraulic “tail” for the hose), for a bolt with metric thread (RNM). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMB600-12-03-Y	Fitting BANJO M12, hose 3/16"	5	-	In stock	Enquiry
TI-ZMB600-12-06-Y	Fitting BANJO M12, hose 3/8"	10	-	In stock	Enquiry
TI-ZMB600-14-03-Y	Fitting BANJO M14, hose 3/16"	5	-	In stock	Enquiry
TI-ZMB600-18-05-Y	Fitting BANJO M18, hose 5/16"	8	-	In stock	Enquiry
TI-ZMB600-18-06-Y	Fitting BANJO M18, hose 3/8"	10	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic fitting (type Z – with an ordinary hydraulic “tail” for the hose), for a bolt with metric thread (RNM). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.