Does the GL compressed air lubricator with BSP female thread, G series, require a specific mounting orientation for optimal oil mist distribution?

Does the GL compressed air lubricator with BSP female thread, G series, require a specific mounting orientation for optimal oil mist distribution? The GL compressed air lubricator with BSP female thread, G series does not have a strict required mounting orientation but optimal performance is achieved when mounted vertically with the sight dome/adjustment and oil reservoir upright. This orientation ensures correct oil pooling and consistent generation and distribution of the oil mist into the pneumatic line. The supplied mounting bracket/holder and standard connection sets (GA L, T, U) support stable installation and appropriate alignment with connected components. Avoid mounting inverted or on a severe incline, which can impair lubrication metering and mist quality. Also respect the specified supply pressure (up to 10 bar), operating temperature (to +70Â°C) and correct connection size (BSP 1/8" Ã· 1") for reliable flow rates across sizes 200â600.

Can the GL compressed air lubricator with BSP female thread, G series be used with other thread standards via adapters without affecting performance?

Yes - the GL compressed air lubricator with BSP female thread, G series can be used with other thread standards via appropriate adapters without inherently affecting its internal lubrication performance, provided the adapters are properly sized and installed. Key points: - Use high-quality adapters that match the GL seriesâ BSP female sizes (1/8"â1") to the required thread standard (e.g., NPT), ensuring correct sealing (thread sealant or PTFE tape as needed). - Maintain flow capacity and pressure ratings: do not introduce restrictive adapters that increase pressure drop beyond the stated performance (supply up to 10 bar; flow rates specified per size at 6 bar inlet, Îp=1 bar). - Ensure temperature compatibility (+70Â°C max) and avoid mechanical stress from misaligned fittings. - Verify system compatibility (materials, thread tolerance) and test after installation for leaks and proper oil mist delivery.

Is the GL compressed air lubricator with BSP female thread, G series compatible with filtration units upstream?

Yes. The GL compressed air lubricator with BSP female thread, G series is compatible with filtration units installed upstream. The lubricator is designed to introduce an oil mist into pneumatic lines and is normally fitted downstream of air preparation equipment (filters and regulators). Key points: - Connection compatibility: The GL series uses internal BSP threads (1/8" to 1"), matching standard BSP-filter outlets and connection sets (GA L, T, U shapes) for straightforward piping between filterâregulatorâlubricator. - Operating limits: Ensure the upstream filter/regulator maintains supply pressure within the GLâs rated range (up to 10 bar) and operating temperature up to +70Â°C. - Flow capacity: Select the GL size to match system flow demands (size 200â600: 3200â12000 l/min at 6 bar inlet, Îp = 1 bar) so the filter upstream does not cause excessive pressure drop or restrict flow. - Installation practice: Fit the filter upstream to remove particulates and condensate before the lubricator. Use compatible connection sets and a correct mounting bracket; observe directional flow and recommended pressure drops. In summary, the GL compressed air lubricator with BSP female thread, G series is suitable for use downstream of filtration units provided you match BSP connections, respect pressure/temperature limits, and choose the lubricator size for the system flow.

Grease nipple compressed air GL with a female BSP thread, series G

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	70

Grease nipple GL series G with a female BSP thread ensures correctness lubrication mist oil equipment in installations pneumatic. W the set found angle bracket/A handle assembly. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: 1/8″ BSP female ÷ 1″. Flow rate: 3200 l/min – size 200, 5400 l/min – size 300, 8300 l/min – size 400, 12000 l/min – size 600 (at an inlet pressure of 6 bar Δp = 1 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AT-GL200-06	Grease nipple GL200 1/8	-	-	In stock	Enquiry
AT-GL300-08	Grease nipple GL300 1/4	-	-	In stock	Enquiry
AT-GL400-10	Grease nipple GL400 3/8	-	-	In stock	Enquiry
AT-GL400-15	Grease nipple GL400 1/2	-	-	In stock	Enquiry
AT-GL600-25	Grease nipple GL600 1	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Grease nipple GL series G with a female BSP thread ensures correctness lubrication mist oil equipment in installations pneumatic. W the set found angle bracket/A handle assembly. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: 1/8″ BSP female ÷ 1″. Flow rate: 3200 l/min – size 200, 5400 l/min – size 300, 8300 l/min – size 400, 12000 l/min – size 600 (at an inlet pressure of 6 bar Δp = 1 bar).