Is the Compressed air panel regulator, type 367 compatible with other 3/8" BSP panel fittings and mounting kits like EW-367K33?

Yes. The Compressed air panel regulator, type 367 is compatible with other 3/8" BSP panel fittings and mounting kits such as EW-367K33. Key reasons: - Thread/connection: the regulator uses a 3/8" BSP female thread, matching standard 3/8" BSP fittings and accessories. - Panel mounting: the description explicitly notes available components for panel mounting (EW-367K33), indicating designed compatibility. - Materials and dimensions: zinc and aluminum alloy construction and the specified 3/8â size align with typical 3/8" BSP mounting hardware. - Performance and venting: supply pressure, operating temperature and atmospheric air vent do not prevent use with standard 3/8" BSP fittings. Recommendation: confirm the kitâs intended mating thread orientation and panel cutout dimensions against your installation drawings to ensure a proper mechanical fit and seal.

Can the Compressed air panel regulator, type 367 be used with higher inlet pressures than 25 bar if protected by external safety devices?

No. The Compressed air panel regulator, type 367 is specified for a maximum supply (inlet) pressure of up to 25 bar. Using it above that limit-even if protected by external safety devices-would exceed the manufacturer's rated supply pressure and could compromise the diaphragm, internal components and atmospheric vent, creating safety and performance risks. Always adhere to the specified maximum supply pressure or consult the manufacturer for a device rated for higher inlet pressures.

Does the Compressed air panel regulator, type 367 require periodic recalibration to maintain its high outlet pressure accuracy?

Compressed air panel regulator, type 367 does not typically require periodic recalibration to maintain its high outlet pressure accuracy under normal operating conditions. The device is a membrane-type pressure reducing valve with an integrated gauge in the knob and an atmospheric vent, designed to provide stable, high-accuracy outlet pressure without frequent adjustment. However, to ensure continued performance you should: - Perform routine visual inspections for damage, contamination, or leaks. - Check filter/air quality upstream and maintain supply pressure within specified limits (up to 25 bar). - Verify operation after any events that could affect accuracy (mechanical shock, contamination, extreme temperature exposure beyond -10Â°C to +90Â°C, or long storage). - Replace worn components or the unit if accuracy drift is observed; use available panel-mount components (EW-367K33) for safe servicing. If application demands traceable calibration or very tight tolerances, implement a periodic verification schedule (interval based on usage, environment, and criticality) and recalibrate or replace the unit when verification indicates deviation.

Compressed air panel regulator, type 367

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	90
Minimum operating temperature [°C]	-10

Membrane-type pressure reducing valve with an integrated pressure gauge in the knob, ideal for panel mounting. It features an atmospheric air vent. High accuracy in maintaining outlet pressure. Available components for panel mounting (EW-367K33). Material: zinc and aluminum alloy. Size: 3/8”. Supply pressure: up to 25 bar. Operating temperature: from -10°C to +90°C. Connection: 3/8″ BSP female thread. Flow rate 1000 l/min (at an inlet pressure of 8 bar and Δp = 1 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EW-367331	Panel reducer 25 bar DN 10, GW 3/8" BSP, with pressure gauge, 0.5 ÷ 3 bar	-	-	In stock	Enquiry
EW-367332	Panel reducer 25 bar DN 10, GW 3/8" BSP, with pressure gauge, 0.5 ÷ 6 bar	-	-	In stock	Enquiry
EW-367333	Panel reducer 25 bar DN 10, GW 3/8" BSP, with pressure gauge, 0.5 ÷ 10 bar	-	-	In stock	Enquiry
EW-367334	Panel reducer 25 bar DN 10, GW 3/8" BSP, with pressure gauge, 0.5 ÷ 16 bar	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Membrane-type pressure reducing valve with an integrated pressure gauge in the knob, ideal for panel mounting. It features an atmospheric air vent. High accuracy in maintaining outlet pressure. Available components for panel mounting (EW-367K33). Material: zinc and aluminum alloy. Size: 3/8”. Supply pressure: up to 25 bar. Operating temperature: from -10°C to +90°C. Connection: 3/8″ BSP female thread. Flow rate 1000 l/min (at an inlet pressure of 8 bar and Δp = 1 bar).